Search Results

Authors were challenged with a task of developing a full vehicle simulation model, with a target to simulate the electrical system performance and perform digital tests like Battery Charge Balance, in addition to the fuel efficiency estimation. A vehicle is a complicated problem or domain to model, due to the complexities of subsystems. Even more difficult task is to have a control algorithm which controls the vehicle model with the required control signals to follow the test specification. Particularly, simulating the control of a vehicle with a manual transmission is complicated due to many associated control signals (Throttle, Brake and Clutch) and interruptions like gear changes. In this paper, the development of a full vehicle model aimed at the assessment of electrical system performance of the vehicle is discussed in brief.

Micro hybrid Systems are emerging as a promising solution to reduce the fuel consumption and greenhouse gas emissions in emerging markets, where the strict emission requirements are being enforced gradually. Micro hybrid Systems reduce the fuel consumption and greenhouse gas emissions in a conventional vehicle with 12 V electrical system, by optimizing the electrical energy generation, storage, and distribution, with functions like Intelligent Alternator Control, Engine Stop/Start, and Load Management. With the advent of Connected Car Systems, information about the vehicle is seamlessly provided to the customer not just through the Human Machine Interface systems within the vehicle, but to other mobile devices used by the customers.

Engine Stop/Start System (ESS) is a prominent subsystem in the Micro Hybrid Systems, and helps to reduce greenhouse gas emissions and fuel consumption. Fundamentally, ESS detects the idle running of the engine, and shuts it down autonomously, and allows the driver to restart the engine, with a routine action like pressing or releasing the clutch or brake pedal. When an engineer designs a system like ESS, typical approach to trigger the system functions is by establishing a sequence of events, detecting it, and enabling the triggers. Influence of the functions on other vehicle systems or vice versa is also considered, and system design is revised to achieve the functional safety. This results in a set of hard rules to be followed for the system functions to work.

Automotive Audio Signaling system is very vital and is controlled by local regulatory requirements. In India, usage of horn is very frequent due to highly congested traffic conditions, and is in the order of 10 to 12 times per kilometer. This results in the deterioration of the “contact”, which enables the functioning of the device. Hence the device requires premature replacement or frequent tuning, which are time consuming and results an increase in warranty costs and cost of service as well. Thus, to overcome this problem a unique and novel approach is proposed in this paper which enhances the life of the automobile horn, by implementing an additional pair of Contacts on circuit breakers, providing a parallel path for the power supply. This effort ensures that the life of the horn is increased by 5 times than the existing design.

Micro Hybrid Systems are a premier approach for improving fuel efficiency and reducing emissions, by improving the efficiency of electrical energy generation, storage, distribution and consumption, yet with lower costs associated with development and implementation. However, significant efforts are required while implementing micro hybrid systems, arising out of components like Intelligent Battery Sensor (IBS). IBS provides battery measurements and battery status, and in addition mission critical diagnostic data on a communication line to micro hybrid controller. However, this set of data from IBS is not available instantly after its initialization, as it enters into a lengthy learning phase, where it learns the battery parameters, before it gives the required data on the communication line. This learning period spans from 3 to 8 hours, until the IBS is fully functional and is capable of supporting the system functionalities.