Search Results

In current practice, tire development and testing are typically experimentally driven. However, as the need to simultaneously optimize multiple noise vibration and harshness (NVH) performance criteria increases and development cycles become shorter, predictive numerical simulation techniques are becoming necessary. In addition, many tire performance areas are coupled and therefore the experimental approach often lacks detailed insights which numerical simulations can provide. Currently, no industrially applicable fully predictive high-fidelity numerical approach that incorporates the use of nonlinear Finite Element (FE) tire models for NVH design is available in literature. Therefore, a fully predictive numerical simulation approach that predicts the rolling of a tire over a coarse road surface is described in this work. The proposed approach allows to predict the dynamic contact- and hub forces that arise during rolling without the need for experimental data.

A large number of testing procedures have been developed to ensure vehicle safety in common and extreme driving situations. However, these conventional testing procedures are insufficient for testing autonomous vehicles. They have to handle unexpected scenarios with the same or less risk a human driver would take. Currently, safety related systems are not adequately tested, e.g. in collision avoidance scenarios with pedestrians. Examples are the change of pedestrian behaviour caused by interaction, environmental influences and personal aspects, which cannot be tested in real environments. It is proposed to use augmented reality techniques. This method can be seen as a new (Augmented) Pedestrian in the Loop testing procedure.

The continuous pursuit for lighter, more affordable and more silent cars, has pushed OEMs into optimizing the design of car components. The different panels surrounding the car interior cavity such as firewall, door or floor panels are of key importance to the NV performance. The design of the sound packages for high-frequency airborne input is well established. However, the design for the mid-frequency range is more difficult, because of the complex inputs involved, the lack of representative performance metrics and its high computational cost. In order to make early decisions for package design, performance maps based on the different design parameters are desired for mid-frequencies. This paper presents a framework to retrieve the response surface, from a numerical design space of finite-element frequency sweeps. This response surface describes the performance of a sound package against the different design variables.

The NVH performance of conventional panels and structures is mainly driven by their mass. Silence often requires heavy constructions, which conflicts with the emerging trend towards lightweight design. To face the challenging and often conflicting task of merging NVH and lightweight requirements, novel low mass and compact volume NVH solutions are required. Vibro-acoustic metamaterials with stopband behavior come to the fore as possible novel NVH solutions combining lightweight requirements with superior noise and vibration insulation, be it at least in some targeted and tunable frequency ranges, referred to as stopbands. Metamaterials are artificial materials or structures engineered from conventional materials to exhibit some targeted performance that clearly exceeds that of conventional materials. They consist typically of (often periodic) assemblies of unit cells of non-homogeneous material composition and/or topology.

This paper proposes a specific parametric model order reduction (pMOR) scheme for the efficient evaluation of beam based structures. The model to be parameterized is a Finite Element (FE) model that represents a generic network of beams with a number of distinct cross-section types. The methodology considers geometrical parameters that describe the cross-section and the material properties of the beams as the design parameters of interest. An affine representation of the model is derived based on the description of the deformation of a uniform beam. This affine representation can be exploited for the hyper-reduction where the evaluation cost of the system matrices is reduced. The reduction of the system matrices is obtained through a projection based approach. For a given number of parameter combinations a modal basis is constructed. A global reduced order basis (ROB) is obtained through a principal component analysis of these local bases.

Active vibration reduction for lightweight structures has attracted more and more attention in automotive industries. In this paper, reduced-order controllers are designed based on H∞ techniques to realize vibration reduction. A finite element model of piezo-based smart structure is constructed from which a nominal model containing 5 modes and validation model containing 10 modes are extracted. A mixed-sensitivity robust H∞ controller is firstly designed based on the nominal structural model. Considering the ease of controller deployment, an order reduction for the controller is then exploited using balanced truncation method. The effectiveness of the reduced-order controller is finally verified on the validation model via system simulations.

In the context of the reduction of traffic-related noise the research reported in this paper provides tools that could be used to develop low noise tyres. Two measurement techniques have been analyzed for exterior noise radiation characterization of a loaded rotating slick tyre on a rough road surface. On one hand sound pressure measurements at low spatial resolution with strategically placed microphones on a half-hemisphere around the tyre/road contact point have been performed. This technique provides a robust solution to compute the (overall) sound power level. On the other hand sound intensity measurements at high spatial resolution by means of a scanning intensity probe have been performed. This technique allows a more detailed spatial visualization of the noise radiation and helps in getting more insight and better understanding of the acoustical phenomena.

The objective of the present study is to experimentally characterize the drag torque in open multi-disks wet clutches. For this purpose, two groups of experiments are performed using an advanced SAE#2 test setup. The experiments are designed under real conditions of variable automatic transmission fluid (ATF) flow rate and higher clutch speed range as experienced by wet clutches in real operation. The first test group examines the influence of parameters such as ATF flow rate, ATF temperature, and disks size whereas, the second test group investigates the effect of disks rotational conditions on the drag torque. By analyzing, the obtained experimental results, the relationship between the amount by which the parameters are varied and the corresponding change in the drag torque are established. In addition, a general qualitative behavior of the drag torque as function of clutch speed is proposed and the associated physical phenomena are explained.