Search Results

During the start-up phase of machines it can happen that tools are inadvertently rotating, which is caused by the half-throttle setting. Due to the starting throttle locking mechanism, the engine's rotational speed is above the engagement speed of the tool (for example the chain of a chain saw). This article describes the software algorithms developed by PRUFREX that are able to prevent rotation of the tool upon machine start at idle. The patented software solution is able to differentiate between start behavior with and without a starting throttle locking mechanism based on the machine's speed and time information and, as a result, can identify or estimate the position of the throttle valve. The effect of the algorithms is the switch-over between different ignition curves that are stored in the microcontroller-operated ignition modules. This includes a provision in the start ignition curve that prevents the tool from rotating.

In each operating state and operating environment, optimum ignition is ensured by continuously analyzing sensor values. Engine manufacturers continue to be faced with the challenge of ensuring that the machine runs as smoothly and quietly as possible. Increased spark duration and higher energy of the ignition spark enable improved combustion of the gasoline-air mixture in the combustion compartment. This article describes an electrical ignition process using an array of multiple coils and a magnetic generator that is rotating in sync with the machine. During this process the magnetic field temporarily flows through the coils and generates a sequence of magnetic flow variations per rotation. This induces corresponding half-waves of alternating voltage in the coils of the ignition module. This article describes a way to use these half-waves for prolonging the ignition spark, leading to a booster effect.