Search Results

An unprecedented global focus on the environment and greenhouse gases has driven recent government regulations on automotive emissions across the globe. To achieve this improvement, Original Equipment Manufacturers (OEMs) have advocated a progressive move towards the use of low viscosity grade oils. However, the use of lower viscosity grades should not compromise engine durability or wear protection. Viscosity modifiers (VM) - polymeric additive components used to tailor the lubricant’s viscometric properties - have been viewed as a key enabler for achieving the desirable balance between fuel economy and engine durability performance. Self-assembling diblock copolymers represent a unique class of VMs, which deliver superior shear stability due to their tunable association/dissociation in the lubricating oil. Superior shear stability ensures that the oil viscosity and its ability to offer reliable engine protection from wear is retained over the life of the oil in the engine.

Increasing vehicle efficiency has been one of the key drivers of the automotive industry worldwide due to new government emission legislations and rising fuel costs. While original equipment manufacturers (OEMs) are responding with innovative hardware designs for new models, lubricant companies are developing additive solutions to reduce frictional losses in the engine thereby increasing fuel economy of both new and existing vehicles. Fuel efficiency of the vehicle can be measured in a variety of driving cycles, including the New European Driving Cycle (NEDC), Japanese JC-08, and FTP-75 (Federal Test Procedure). The type of vehicle used in fuel economy evaluation in the same cycle plays a significant role. Fuel consumption rates for the same vehicle measured in these driving cycles vary due to the differences in the cycles. Thus, to assess the effect of the lubricant on fuel efficiency in various cycles, the fuel consumption is measured relative to a reference oil.

Global environmental and economic concerns of today's world dictate strict requirements for modern heavy duty engines, especially in emissions, noise control, power generation, and extended oil drain intervals. These requirements lead to increased stresses imposed on lubricants in modern heavy duty engines. At the same time, the original equipment manufacturers (OEMs) desire additional fuel economy from the lubricating oil, requiring the use of lower viscosity lubricants to minimize frictional losses in the engine. These lower viscosity oils are subjected to increased stresses in the engine and need to provide robust performance throughout their lifetime in order to protect engine parts from wear and damage. One of the most important lubricant qualities is to maintain viscosity throughout the drain interval and thus provide continuous engine protection.

This paper investigates the phenomena of gel formation and poor filtration performance of engine oils containing certain olefin copolymer (OCP) viscosity modifiers (VMs). Low temperature pilot plant and bench scale filtration tests have been used to study the filtration behaviors of a wide range of low-ethylene and high-ethylene OCP VMs at various temperatures but with particular focus on the performance at 0°C. Further, rheological studies have been carried out on fully formulated oils as well as on PAO solutions of these polymers to understand the effect of thermal history on the polymer solution behavior over a broad range of temperatures. These studies suggest that many high-ethylene OCPs are prone to the formation of polymer aggregates in oil solutions. Long crystalline polyethylene segments present in high-ethylene OCP molecules are believed to interact with similar segments in neighboring molecules, leading to the formation of aggregates.