Viewing 1 to 5 of 5
Journal Article
Yong-Yuan Ku, Jau-Huai Lu, Ko Wei Lin
Due to the rising price of crude oil, biofuel is being considered as a global alternative for fossil fuels to reduce the emission of greenhouse gases. Diesel blended with bio fuel is currently being widely adopted in many countries. The Taiwanese government has been enforcing the adoption of B2 since 2010. However, there have remained consistent concerns about engine durability related to the use of biofuel, especially regarding after-treatment systems. A selective catalytic reduction system (SCR) has been utilized recently to reduce NOX emission in order to meet the Euro IV and V emission standards. To evaluate the impact of biodiesel on the durability of engines equipped with the SCR system, a long-term testing program was organized for the purposes of this study. The results can be used as a reference for the development of marketing promotion strategies as well as government policies in Taiwan.
Technical Paper
Ko Wei Lin, Ya Lun Chen, Yong-Yuan Ku, Ta-Wei Tang
Abstract Biodiesel, Fatty Acid Methyl Esters (FAME), can be made from different types of animal and vegetable oils. Its characteristics are different from those of fossil diesel, such as oxygen content, higher cold filter plugging point, and so on. Compared with fossil diesel, biodiesel can be oxidized more easily. If the fuel is oxidized, there might be product to cause some problems, like blocking filters. Therefore, the information of the storage life of the fuel is very important to vehicle owners. Moreover, the storage condition of the fuels is related to the types of source materials, additives, local weather or quality control of biodiesel. This research had used D100 and B2 fuels as experiment samples. (Blending B100 made by two different companies and represented A and B.)
Journal Article
Yong-Yuan Ku, Ta-Wei Tang, Ko Wei Lin, Steven Chan
With the development of world economy, the shortage in the supply of oil energy as well as the greenhouse effect have become a public concern around the world. The application of biodiesel on vehicle transportation has become the focus of development in many countries. Biodiesel, Fatty Acid Methyl Esters (FAME), is made during the process of transesterification of the animal and vegetable oils. Compared with fossil diesel, biodiesel has some characteristics, such as organic acid, higher water saturation, and oxygen content. From the results of the literatures [1] to [5], it showed that biodiesel would cause the inflation of some plastic and flexible products and the corrosion of metal materials. Metal fuel tanks have the characteristics of high flammability, high impact resistance, and good workability and are often used in commercial vehicles. The corrosion of metal materials is a natural chemical change and it can be influenced by the environment.
Technical Paper
Chien- Hsing Li, Yong-Yuan Ku, Ko Wei Lin
Abstract Due to the energy safety and environment protection, increase the percentage of biodiesel blend has become one of world wide strategies. In the past research, using biodiesel would affect the engine performance and increase the exhaust emission. Fortunately, these problems can be solved through the rapidly development of engine control technologies and lightweight structure design. However, the consideration of light/downsizing engine design with the same power has brought out much combustion noise. According to the higher and higher proportion has been widely used over the world. There was less researches focus on the different blending biodiesel impact on combustion noise. The combustion noise correspond to different blending biodiesel (D100,B5,B8,B20,B40,B100) which made form waste cooking oil has been discussion in this study.
Journal Article
Yong-Yuan Ku, Ko Wei Lin, Ya-Lun Chen, Ching-Fu Liao
Due to the increasing price of crude oil, biofuel as an alternative of fossil fuels is sought to be a global-wide solution to reduce the emission of greenhouse gas. In order to compare the influence on engine which meet euro IV emission standard by using pure fossil diesel, 2% and 5% biodiesel. A long-term operation with blended 2% and 5% biodiesel by standard engine test had been evaluated in this study. The results could be referred to the consideration of marketing promotion strategy as well as government policy in Taiwan. Both B2-B5 diesel fuel (2 and 5 vol% biodiesel) and diesel fuel were employed to the same engines for testing purpose to compare the influence. The engines were equipped with an electronically controlled common-rail fuel injection system. After 500 hours full load durability operation, the key components of the engines were analyzed and characterized by a series of inspections to identify the degree of decay and wear behavior.
Viewing 1 to 5 of 5