Search Results

The ubiquity of gasoline direct injection (GDI) vehicles has been rapidly increasing across the globe due to the increasing demand for fuel efficient vehicles. GDI technology offers many advantages over conventional port fuel injection (PFI) engines, such as improvements in fuel economy and higher engine power density; however, GDI technology presents unique challenges as well. GDI engines can be more susceptible to fuel injector deposits and have higher particulate emissions relative to PFI engines due to the placement of the injector inside the combustion chamber. Thus, the need for reliable test protocols to develop next generation additives to improve GDI vehicle performance is paramount. This work discloses a general test method for consistently fouling injectors in GDI vehicles and engines that can accommodate multiple vehicle/engine types, injector designs, and drive cycles, which allows for development of effective GDI fuel additives.

Gasoline direct-injection (GDI) engines have a well-known propensity to form intake valve deposits (IVD), regardless of operator service, engine architecture, or cylinder configuration. Due to the lack of a fuel-washing process that is typical of Port Fuel Injected (PFI) engines, the deposits steadily accumulate over time and can lead to deterioration in combustion, unstable operation, valve-sticking, or engine failure. Vehicles using these engines are often forced to undergo expensive maintenance to mechanically remove the deposits, which eventually re-form. The deposit formation process has not been well-characterized and there is no standardized engine test to study the impact of fuel or lubricant formulation variables. To meet this need, a proprietary vehicle-based GDI-IVD test that is both repeatable and responsive to chemistry has been developed.

Vehicle manufactures are significantly increasing the production of Direct Injection Gasoline (DIG) engines to help meet the requirements of governmental regulations and the demands of consumers. While DIG powertrains offer multiple advantages over conventional gasoline engines they can be susceptible to fuel related deposit formation, specifically within the fuel injector nozzle. Fuel injector deposits have been linked to a number of negative effects that can impact the normal operation of the engine. A DIG deposit test has been developed to evaluate Deposit Control Additives (DCA) and their effect on injector deposits. Multiple metrics for evaluating fuel injector deposits were investigated to determine a suitable method for quantifying deposit formation. Interrogation of the vehicle On-Board Diagnostic (OBD) system was identified as the optimal method for quantifying deposit formation throughout the duration of the test.