Search Results

Nowadays turbocharging the internal combustion engine has become an essential tool in the automotive industry to meet downsizing technique requirements. In that context turbocharger unsteadiness is huge since both turbine and compressor work under high pulsating flow conditions, being turbocharger behavior prediction more difficult but still key for matching and predicting ICE performance. The well understanding and modeling of the occurring physical phenomena during turbocharger unsteady and off-design operation seems crucial. In this paper three small radial turbines used in turbochargers from passenger car applications have been tested under high temperature and pulsating flow conditions on the turbine side. A gas stand and a rotary valve installed on the turbine inlet have been used to reproduce pulses with desired characteristics. A beam-forming technique for pressure wave's decomposition has been used to analyze turbine performance in detail.

An acoustic one-dimensional compressor model has been developed. This model is based on compressor map information and it is able to predict how the pressure waves are transmitted and reflected by the compressor. This is later on necessary to predict radiated noise at the intake orifice. The fluid-dynamic behavior of the compressor has been reproduced by simplifying the real geometry in zero-dimensional and one-dimensional elements with acoustic purposes. These elements are responsible for attenuating or reflecting the pressure pulses generated by the engine. In order to compensate the effect of these elements in the mean flow variables, the model uses a corrected compressor map. Despite of the fact that the compressor model was developed originally as a part of the OpenWAM™ software, it can be exported to other commercial wave action models. An example is provided of exporting the described model to GT-Power™.

Nowadays turbocharging the internal combustion engine has become a key point in both the reduction of pollutant emissions and the improvement of engine performance. The matching between turbocharger and engine is difficult; some of the reasons are the highly unsteady flow and the variety of diabatic and off-design conditions the turbocharger works with. In present paper the importance of the heat transfer phenomena inside small automotive turbochargers will be analyzed. These phenomena will be studied from the point of view of internal heat transfer between turbine and compressor and with a one-dimensional approach. A series of tests in a gas stand, with steady and pulsating hot flow in the turbine side, will be modeled to show the good agreement in turbocharger enthalpies prediction. The goodness of the model will be also shown predicting turbine and compressor outlet temperatures.