Search Results

The paper is devoted to the simulation of A320 wing assembly on the base of numerical experiments carried out with the help of ASRP software. The main goal is to find fasteners’ configuration with minimal number of fastening elements that provides closing of admissible initial gaps. However, for considered junction type initial gap field is not known a priori though it should be provided as input data for computations. In order to resolve this problem the methodology of random initial gap generation based on available results of gap measurements is developed along with algorithms for optimization of fasteners' configuration on generated initial gaps. Presented paper illustrates how this methodology allows optimizing assembly process for A320 wing.

The paper is devoted to description of features and functionalities of special software complex aimed at global simulation of junction process using efficient numerical algorithms. The paper presents the concept of developed software and its structure. Types of problems, which the complex is applicable for, are enumerated.

The paper is devoted to further extension and development of numerical approach aimed at simulation of riveting process during aircraft assembly (see [1,2,3,4]). Previous research has shown that developed methodology provides reliable results if the rigid motion of bodies being assembled is forbidden. However, some small parts in the airframe assemblies are not supported prior to the junction and can freely move as a rigid body. This fact introduces additional difficulties when solving corresponding contact problem. The paper is devoted to description and analysis of two different modeling approaches that allow taking unsupported parts into consideration when simulating airframe assembly process.

The paper is devoted to further development of numerical methods for simulation of riveting process during aircraft assembly (see [3, 4]). Algorithm modifications that increase computation accuracy, speed and complexity are given. These modifications involve the dual problem solving, incorporation of multiple calculation nets and special two stage procedure for calculation of deformations and stresses arising during assembly.

The paper describes the methodology of contact problem solving that is used in specialized software code aimed at simulation of aircraft assembly process. For considered class of problems it is possible to radically reduce the number of unknowns without loss of accuracy. The results of validation of developed code against physical experiments and commercial FEM codes are also given.