Search Results

The challenge for decreasing the emissions of compression ignition engines now remains mainly on NOx control. If the Lean NOx Trap (LNT) and Selective Catalytic Reduction by Urea (Urea-SCR) are very efficient, their extra-cost and management are a major issue for the OEMs. In that context, the selective catalytic reduction by hydrocarbons (HC-SCR) appears to be an interesting alternative solution, with a more limited NOx conversion efficiency but an easier packaging (diesel fuel as a reductant) and a limited price (reasonable coating cost / no PGM). In the framework of the RedNOx project, a prototype catalyst made of 2% silver on Alumina coated on cordierite was manufactured and tested on a synthetic gas bench. In parallel, an exhaust implementation study has been led to ensure the most suited conditions for injection. Thanks to SGB and simulation results, adapted engine tests have been designed and performed.

Stringent emissions standards (Euro 6 and Tier2Bin5) lead to the use of nitrogen oxides (NOx) aftertreatment. One of the most widespread technical solutions able to meet these legislations is Urea Selective Catalytic Reduction (Urea SCR). A urea aqueous solution is introduced into the exhaust system in order to reduce NOx over SCR catalyst. Before reaching the catalyst, the aqueous solution has to be transformed into ammonia. Current serial applications need long distances (≻ 400 mm) from injection point to SCR catalyst and a mixer apparatus to ensure sufficient mixing between exhaust gas and ammonia. Because of this distance, SCR catalyst is located far from the engine. The light-off of the catalyst is penalized and therefore the efficiency of the SCR system is low. The purpose of this paper is to show a compact mixing device able to ensure mixing in a short distance (~ 75 mm).