Search Results

A holistic modelling approach has been employed to predict combustion, cyclic variability and knock propensity of a turbocharged downsized SI engine fuelled with gasoline. A quasi-dimensional, thermodynamic combustion modelling approach has been coupled with chemical kinetics modelling of autoignition using reduced mechanisms for realistic gasoline surrogates. The quasi-dimensional approach allows a fast and appreciably accurate prediction of the effects of operating conditions on the burn-rate and makes it possible to evaluate engine performance. It has also provided an insight into the nature of the turbulent flame as the boost pressure and speed is varied. In order to assess the sensitivity of the end-gas chemical kinetics to cyclic variability, the in-cylinder turbulence and charge composition were perturbed according to a Gaussian distribution.

Highly downsized, Direct Injection (DI) engines benefit strongly from cylinder scavenging where possible, to reduce internal residuals thereby reducing the occurrence of knock. Some researchers also suggest that non-homogeneous distribution of internal residuals at high load could contribute to pre-ignition or ‘mega-knock’ with much higher pressure amplitude than that of common knock. For this reason, a computational study was conducted to assess the residual gas fraction and in-cylinder distribution, using the combustion geometry of the three cylinder, 1.2L MAHLE Downsizing engine, which has proven to be a very robust and reliable research tool into the effects of combustion effects under a number of different operating conditions. This study used a CFD model of the cylinder gas exchange. ES-ICE coupled with STAR-CD was employed for a moving mesh, transient in-cylinder simulation.

The need to meet ever more stringent emission legislations over the last decade has led to a significant increase in diesel engine complexity. A typical modern passenger car diesel engine now features variable geometry exhaust gas turbocharging and variable charge motion in combination with exhaust gas recirculation. Further improvements are still required and one technology that has the potential to improve fuel economy and reduce emissions is variable valve timing. This gives the ability to alter in-cylinder charge motion and effective compression ratio. In doing so, it not only alters in-cylinder pressures and temperatures, but also the operating point of the turbocharger and EGR system. This paper demonstrates how both 1-D and 3-D numerical simulation have been used in conjunction with engine testing to analyse the fundamental effects and separate the interactions.

In-cylinder air flow structures are known to play a major role in mixture preparation and engine operating limits for DISI engines. In this paper PIV was undertaken on in-cylinder flow fields for three different planes of measurement in the intake and compression strokes of a DISI engine for a low-load engine operating condition at 1500 RPM, 0.5 bar inlet plenum pressure (World Wide Mapping Point). One of these planes was vertical, cutting through the centrally located spark plug (tumble plane); the other two planes were horizontal, one close to TDC (10 mm below fire face) and the other one close to mid stroke (50 mm below fire face). Statistical analysis was undertaken on the numbers of cycles needed to determine ensemble average flow-field and turbulent kinetic energy maps with up to 1200 cycles considered. The effect of engine head temperature was also examined by obtaining flow fields using PIV with the engine head coolant held at 20 °C and 80 °C.