Search Results

In this paper, a mathematical model for simulating the 3D dynamic response of a valve spring is described. The 3D model employs a ‘geometrically exact’ 3D beam connected between each mass of the discretised mass-elastic system. Shear deformations within the beam are also considered, which makes it a Timoshenko type finite element. Results from the 3D model are compared with results from a more conventional 1D model. To validate the results further, some results are compared with real test data that was gathered during a technical consulting project. In this project, a prototype valvetrain that was originally giving acceptable durability began to wear the spring seats when a new batch of springs were procured and tested. 1D and 3D simulation results were used to help understand the cause of the failure and to make recommendations to resolve the issue. Results showed that the 3D model was able to predict the spring seat loads with greater precision than the 1D spring could.

Engine efficiency and optimization are key aspects for automotive manufacturers. Lamborghini has particularly focus attention for reduction of time to market building up a synergic approach for new component's development using simulation, Know-how experiences, engine engineering expertise and experimental validation. In particular to reach the best results in the shortest time it is used, in the preliminary stage of development, a massive support of simulation analysis. In the Lamborghini approach analysis and simulation has become key aspects during concept and development of timing drives. This type of activity is used to support the development of better chain timing drives focusing on improving durability, lower friction, less noise and reduced cost in less time than conventional trial and processes. Even during the concept design phase it is useful to use a mathematical model to calculate dynamic forces and motions of a chain drive.