Search Results

The effect of exhaust gas recirculation (EGR) on flame lift-off in non-stationary n-heptane sprays was studied under Diesel engine-like conditions using numerical simulation involving complex chemistry and a novel partially stirred reactor (PaSR) model of subgrid turbulence-chemistry interaction. The flame-stabilization mechanism is a result of complex physical and chemical interactions and cannot be described by a simplified theory. To leading order it is determined by the chemical reaction time at the leading edge, the turbulent diffusivity, and the flow velocity; so that there exists a balance between the local convection velocity and the triple-flame propagation speed. In this study of ignition and flame formation and stabilization processes, the VSB2 stochastic blob-and-bubble spray model was used in combination with the volume reactor fraction model (VRFM) implemented in OpenFOAM.

The accuracy and robustness of spray models and their implementation in current commercial CFD codes vary substantially. However, common features are that the resulting spray penetration and levels of spray-generated turbulence - two factors that strongly influence the rate of heat released during combustion - are to a great extent grid size-dependent. In the work presented here a new kind of spray model has been implemented and thoroughly tested, under various ambient conditions, in the open source code OpenFOAM. In addition, since the turbulence model applied in simulations is known to strongly affect spray penetration rates, results obtained using both the standard k-ε and RNG k-ε models have been compared. In the new spray model, designated VSB2, the traditional Lagrangian parcel has been replaced by a so-called stochastic blob containing droplets with a distribution of sizes, rather than a number of uniform-sized droplets.