Search Results

In this study, formation behaviors of soot in laminar diffusion flames of diesel fuel with fatty acid or fatty acid methyl ester (FAME) were investigated. Oleic acid and oleic acid methyl ester were selected as fatty acid and fatty acid methyl ester. Combustion gas emitted from the laminar diffusion flame was sampled, and PM composition in the gas was analyzed. Laser induced incandescence (LII) and laser induced fluorescence (LIF) techniques were applied to measure soot and polycyclic aromatic hydrocarbon (PAH) distributions in the laminar diffusion flames. As the results, soot emission and soot incandescence distributions were decreased by the addition of fatty acid or fatty acid methyl ester. Moreover, PAH concentration in the closed flame became high by addition of fatty acid or fatty acid methyl ester.

Impingement of a spray flame on the periphery of the piston cavity strongly affects heat loss to the wall. The heat release rate history is also closely correlated with the indicated thermal efficiency. For further thermal efficiency improvement, it is thus necessary to understand such phenomena in state of the art diesel engines, by observation of the actual behavior of an impinging spray flame and measurement of the local temperature and flow velocity. A top-view optically accessible engine system, for which flame impingement to the cavity wall can be observed from the top (vertically), was equipped with a high speed digital camera for direct observation. Once the flame impinged on the wall, flame tip temperature decreased roughly 100K, compared to the temperature before impingement.