Search Results

Recent development has renewed the interest in drivetrain concepts which give a higher degree of freedom by disconnecting the engine and vehicle speeds. This freedom raises the demand for active control, which especially during transients is not trivial but of which the quality is crucial for the success of the drivetrain concept. In this work the fuel optimal solution for a turbocharged diesel engine connected to a load which does not restrict the engine speed is derived, analysed and utilized for finding a suboptimal operating point trajectory. We use a Willan s efficiency model for the engine, expanded with a first order delay dependent torque reduction representing the turbocharger pressure, and study different output power transients. The analysis is made with dynamic programming, Pontryagin's maximum principle and a suboptimal strategy based on the static optimal operating points.

The problem addressed is how to drive a heavy truck over various road topographies such that the fuel consumption is minimized. Using a realistic model of a truck powertrain, an optimization problem for minimization of fuel consumption is formulated. Through the solutions of this problem optimal speed profiles are found. An advantage here is that explicit analytical solutions can be found, and this is done for a few constructed test roads. The test roads are constructed to be easy enough to enable analytical solutions but still capture the important properties of real roads. In this way the obtained solutions provide explanations to some behaviour obtained by ourselves and others using more elaborate modeling and numeric optimization like dynamic programming. The results show that for level road and in small gradients the optimal solution is to drive with constant speed.

New and exciting possibilities in vehicle control are revealed by the consideration of topography, for example through the combination of GPS and three dimensional road maps. How information about future road slopes can be utilized in a heavy truck is explored. The aim is set at reducing the fuel consumption over a route without increasing the total travel time. A model predictive control (MPC) scheme is used to control the longitudinal behavior of the vehicle, which entails determining accelerator and brake levels and also which gear to engage. The optimization is accomplished through discrete dynamic programming. A cost function that weighs fuel use, negative deviations from the reference velocity, velocity changes, gear shifts and brake use is used to define the optimization criterion. Computer simulations back and forth on 127 km of a typical highway route in Sweden, show that the fuel consumption in a heavy truck can be reduced with 2.5% with a negligible change in travel time.