Search Results

Previous studies of gasoline direct-injection compression-ignition (GDCI) showed good potential for very high efficiency, low NOx, and low PM over the full speed-load range. Low-temperature combustion was achieved using multiple-late injection (MLI), intake boost, and cooled EGR. Advanced injection and valvetrain were key enablers. In the current study, a new piston was developed and matched with the injection system. Single-cylinder engine tests were conducted with the objective to reduce injection pressure, intake boost, and swirl levels. Results showed that ISFC could be further improved while maintaining low levels of NOx, PM, and combustion noise. Efficiency loss analysis indicated a very efficient thermodynamic process with greatly reduced heat losses. Injection parameters could be used to control combustion phasing with good combustion stability. Engine simulations were performed to develop a practical boost system for GDCI.

Brazilian ethanol vehicles are typically equipped with an auxiliary gasoline sub-tank fuel system which aids cold starting and drivability for low ambient temperatures. Port fuel injectors capable of rapidly heating ethanol have been developed to eliminate this auxiliary system. These injectors also enable reductions in emissions. Computational Fluid Dynamics (CFD) is used in conjunction with Taguchi Robust Engineering methods to optimize the heat exchanging geometry of these heated injectors. Simulation results are confirmed with experimental hardware and engine cold start testing. Modeling results, experimental hardware, and engine cold start performance is presented and discussed.