Search Results

Tube bends are critical in an exhaust system. The acceptability of tube bends is based on the induced level of shape imperfections considered. An analysis is presented for the performance tuning of the genetic algorithm including the importance of raw material selection, ovality and elongation property. This study is an attempt to analyze the ovality effect of STAC 60/60 material. CAE tools are essential to exploit the design of experiments and find out the optimum values of the design parameters in comparison with full factorial designs. Especially the effects of materials, dimensions and geometry shape of the ultimate strength were discussed by both CAE and experiments. The ultimate strength of steel tube was evaluated at least 20-30% as a local strain independent of the materials. The dependency of ultimate bending angle on original centre angle of the tube bend was clarified.

Bending moment is one of the strongest pursuits in resonator's structural validation. Eigen problems play a key role in the stability and forced vibration analysis of structures. This paper explains the methodology to determine the weak points in the resonator assembly considering the additional effects of the installation forces and temperature impacts. Using strain energy plots, weakest part of the product is identified in the initial stage. The solution comes in unique way of utilizing the worst case scenarios possible. As a consequence, the stress generated by these analyses will prove to be critical in concerning the durability issue of the system. These conditions are evaluated by a finite element model through linear approaches and results are summarized.

Generation of discretization with prescribed element sizes are adapted to the geometry. From the rules of thumb, for a complicated geometry it is important to select the reasonable element order, shapes and size for accurate results. In order to that, this paper describes the influence of elemental algorithm of the catalytic converter mounting brackets. Brackets are main source of mounting of various systems mainly intake and exhaust in the engine. In hot end exhaust system, a bracket design plays a vital role because it has to withstand heavy structural vibrations without isolation combined with thermal loads. Bracket design and stiffness determines the whole catalytic converter system's rigidity. So, here discretization of converter brackets by linear and parabolic elements is studied with different elements types and compared.

Automotive exhaust system components are exposed to many types of vibrations, from simple sinusoidal to maximum random excitations. Computer-Aided engineering (CAE) plays an inevitable role in design and validation of hot vibration shaker assembly. Key Life Test (KLT), an accelerated hot vibration durability test, is established to demonstrate the robustness of a catalytic converter. The conditions are chosen such a way that the parts which passes key life test will always pass in the field, whereas the parts which fail in the key life test need not necessarily fail in the field. The hot end system and the test assembly should survive in these aggressive targeted conditions. The test fixture should be much more robust than the components that it should not fail even if the components fail. This paper reveals the computational methodology adopted to address the design, development and validation of the test assembly.

Simulation's drive towards reality boundary conditions is the toughest challenge. Experience has shown that often the most significant source of error in thermal and dynamic analyses is associated within specified boundary conditions. Typically, validating the system by considering both thermal and dynamic loads with predefined assumptions is time consuming and inconclusive when confronted with reality boundary conditions. Thus, the solution comes in unique way of combining thermal and dynamic loads with specified boundary conditions and will convey computational results closer to the real scenario. As a consequence, strain concentrated regions due to thermal expansion are aggregated more, when coupled with dynamic loading. The stress generated by the coupled analyses will prove to be critical in concerning the durability issue of the hot end system. These conditions are evaluated by a finite element model through linear and non-linear approaches and results summarized.