Search Results

Demands for higher power engines have led to higher pressures in fuel injectors. Internal nozzle flow plays a critical role in the near nozzle flow and subsequent spray pattern. The internal flow becomes more difficult to model when the injector pressure and internal shape make it more prone to cavitation. Two Bosch injectors, proposed for experimental and computational studies under the Engine Combustion Network (namely “Spray C” and “Spray D”) are modeled in the computational fluid dynamics code ANSYS Fluent. Both injectors operate with n-dodecane as fuel at 150 MPa inlet pressures. The computational model includes cavitation effects to characterize any cavitating regions. Including compressibility of both liquid and vapor is found to be critical. Also, due to high velocity gradients and stresses in the nozzle, turbulent viscous energy dissipation is considered along with pressure work resulting from significant pressure changes in the injector.

Durability assessments of modern engines often require accurate modeling of thermal stresses in critical regions such as cylinder head firedecks under severe cyclic thermal loading conditions. A new methodology has been developed and experimentally validated in which transient temperature distributions on cylinder head, crankcase and other components are determined using a Conjugate Heat Transfer (CHT) CFD model and a thermal finite element analysis solution. In the first stage, cycle-averaged gas side boundary conditions are calculated from heat transfer modeling in a transient in-cylinder simulation. In the second stage, a steady-state CHT-CFD analysis of the full engine block is performed. Volume temperatures and surface heat transfer data are subsequently transferred to a thermal finite element model and steady state solutions are obtained which are validated against CFD and experimental results.