Search Results

This paper presents the analysis of a series of frontal crash tests conducted by the Insurance Institute of Highway Safety that are commonly referred to as Small Overlap Impacts (SOI). The occurrence and severity of such frontal impacts in the real world were estimated using two different methods. Both methods used the National Automotive Sampling Scheme (NASS), which is a stratified sample of crashes in the US. The first method utilized an algorithm commonly known as Frontal Impact Taxonomy (FIT). The second method was based on comparison of deformation patterns of vehicles involved in frontal crashes in the NASS data files with those produced in tests conducted by the IIHS. FIT analysis of the data indicate that approximately 7.5% of all 11-1 o'clock frontal crashes in NASS are represented by the IIHS SOI test condition and they account for 6.1% of all serious-to-fatal injuries to front seat occupants restrained by seat belts and airbags.

The responses of a 5th percentile female ATD in the driver and/or rear passenger positions of 56 crashes are described. The Transport Canada side impact programme consisted of LTV-to-car impacts, car-to-car impacts and IIHS barrier-to-car tests. The majority of the tests involved severe crash conditions for which the vehicles were not designed. The SID-IIs head, chest and abdominal responses were compared to determine the effects of the striking bullet geometry, the angle of impact, the impact point and the self-protective elements of the struck vehicle, including airbag technology and armrest designs. The SID-IIs head responses and deflection measures were sufficiently sensitive to discriminate between the various striking vehicles, crash configurations, airbag systems and armrest characteristics.

This technical paper presents the results of biomechanical testing conducted on the ES-2 dummy by the Occupant Safety Research Partnership and Transport Canada. The ES-2 is a production dummy, based on the EuroSID-1 dummy, that was modified to further improve testing capabilities as recommended by users of the EuroSID-1 dummy. Biomechanical response data were obtained by completing a series of drop, pendulum, and sled tests that are outlined in the International Organization of Standardization Technical Report 9790 that describes biofidelity requirements for the midsize adult male side impact dummy. A few of the biofidelity tests were conducted on both sides of the dummy to evaluate the symmetry of its responses. Full vehicle crash tests were conducted to verify if the changes in the EuroSID-1, resulting in the ES-2 design, did improve the dummy's testing capability. In addition to the biofidelity testing, the ES-2 dummy repeatability, reproducibility and durability are discussed.

In 1998, Rouhana et al. described development of a new device, called the IR-TRACC (InfraRed - Telescoping Rod for Assessment of Chest Compression). In its original concept, the IR-TRACC uses two infrared LEDs inside of a telescoping rod to measure deflection. One LED serves as a light transmitter and the other as a light receiver. The output from the receiver LED is converted to a linear function of chest compression using an analog circuit. Tests have been performed with IR-TRACC units at various labs around the world since 1998. A first-generation IR-TRACC system was retrofit into a Q3 dummy by TNO. Similarly, a mid sized male Hybrid III dummy thorax and a small female Hybrid III dummy thorax have been designed by First Technology Safety Systems (FTSS) such that each contains 4 second-generation IR-TRACC units. The second-generation IR-TRACC is the result of continued development by FTSS, especially in the areas of the analysis circuit, manufacturing and calibration methods.

Child dummies were seated in size appropriate child restraints and exposed to in-vehicle, static, side mounted airbag deployments as well as full scale side impact crash tests. The child seat sample included rear and forward facing child restraints and booster seats. Anthropomorphic test dummies (ATD) included an 18 month infant and fully instrumented Hybrid III 3 year old and Hybrid III 6 year old child dummies. Preliminary results suggest that properly restrained infants and children occupying age appropriate child seats may receive some protective benefits from side airbags provided the child seat and the child occupant are correctly positioned.

The NHTSA’s final interim rule on advanced airbags describes two static out-of-position test procedures for the 5th percentile female dummy. Recent testing by Transport Canada suggests that the procedure described for the positions may not be representative of the worst case condition and may include elements that are not realistic for a 5th percentile driver. A modified positioning procedure which prioritizes chest placement and positions the steering wheel in a location that is compatible with the visibility and comfort requirements of a 5th percentile female driver is described. A modified chin on hub procedure is also described. Results of the modified procedures are compared to the NHTSA procedures for a number of late model vehicles.

Drawing on recent Canadian field collision investigations and crash testing using the SIDIIs dummy, the field experience and crash performance of side-mounted airbag systems are reviewed. All of the inflatable technologies tested demonstrated the ability to greatly reduce head injury potential. Further improvements to the design of inflatable head protection devices are required to better ensure they contain and protect the head of occupants seated in locations forward of the mid seat track. New moving deformable barrier designs, such as the one recently developed by the IIHS, appear to offer significant advantages over designs currently used to regulate side impact protection. Improving the level of protection against chest injury to car occupants in SUV-to-car side impacts represents a significant challenge.

Occupants exposed to far-side crashes are those seated on the side of the vehicle opposite the struck side. This study uses the NASS/CDS 1988–98 to determine distributions of serious injuries among restrained occupants exposed to far-side crashes and the sources of the injuries. Vehicle-to-vehicle crash tests were conducted to study dummy kinematics. The NASS/CDS indicated that the head accounted for 45% of the MAIS 4+ injuries in far-side collisions and the chest/abdomen accounted for 39%. The opposite-side interior was the most frequent contact associated with driver AIS 3+ injuries (26.9%). The safety belt was second, accounting for 20.8%. Vehicle-to-vehicle side impact tests with a 60 degree crash vector indicated that different safety belt designs resulted in different amounts of head excursion for the far side Hybrid III dummy. For all three point belt systems tested, the shoulder belt was ineffective in preventing large amounts of head excursion.

This paper reports on a parametric study of side impact crash tests. Relative changes in injury risk are assessed for both front and rear struck side occupants in tests with variation of mass, stiffness, geometry and speed of the impacting mobile deformable barrier. The study concludes that the ground clearance of the MDB face and impact velocity have a significantly greater effect on injury risk than the other parameters. The paper also includes consideration of tests to further investigate the effects of mass ratio between the struck and striking vehicle. This cooperative project between the Australian Department of Transport and Regional Services and Transport Canada includes analysis of intruding door behaviour and consequent effects on injury risk.

Static out-of-position tests were performed to identify the potential for injury as a function of position, airbag type and vehicle seat characteristics. Seat and door mounted airbags, head curtains and head tubes were evaluated. Out-of-position testing was carried out with the Hybrid III 3 year old, 6 year old and the TNO Q3 3 year old child dummies. In-position tests and a dynamic test were conducted to monitor child seat and airbag interactions and to confirm that properly restrained children would not be exposed to undue risk from a deploying side airbag. Results of the out-of-position testing suggest that current side airbag designs may cause serious and/or fatal neck and chest injuries. In-position static testing with child seats suggested a potential for intrusion into the child occupant space leading to structural damage of the car seat.

This paper discusses an attempt to relate measured loading at the head neck junction of arestrained six year old ATD during a frontal crash, to the mechanism of upper cervical fracture dislocation in young children. Lap belt, lap shoulder belt anda four point restraint system are considered. The basis for the reconstructions is the fatal injury to lap-belt restrained young children seated in the rear seat of contemporary minivans. The study concludes that simple forces and bending moments measured on such an ATD may not provide a sufficient basis for judging the likelihood of such an injury. Suggestions for a more comprehensive injury analysis are made.

Dummy response and restraint configuration factors associated with a known child injury environment were investigated using a spinal-cord injury accident case, a full-scale reconstruction, and sled simulations. The work is one of several studies undertaken in association with the International Task Force on Child Restraining Systems to support the development of improved neck injury criteria and restraint systems for young children. A two-vehicle crash involving a restrained child occupant was investigated in detail and reconstructed in full-scale at the Transport Canada Motor Vehicle Test Centre using the CRABI 6-Month dummy. Vehicle damage and crush characteristics closely resembled that of the case vehicles. Dummy instrumentation included head and chest accelerometers and upper and lower neck transducers. The case occupant had been facing forward and had sustained a contusion of the spinal cord at T2 that resulted in paraplegia.

Currently, one of the major challenges for automotive engineers is to provide additional protection to motor vehicle occupants involved in side-impact collisions. A considerable amount of research is being conducted into this problem by governments and motor vehicle manufacturers on a worldwide basis. Changes to the current safety standards relating to side impact protection have been proposed in both North America and Europe. The proposed standards involve the use of dummies in collisions between a moving barrier and a stationary test vehicle. A total of 22 side impact tests of production vehicles have been completed to date to assess the appropriateness of the test procedures developed in the U.S. and Europe in the context of the Canadian vehicle mix and associated side impact accident problem. Vehicle performance rankings provided by the two test procedures were found to vary greatly.