Search Results

Tire modal performance plays an important role in passenger car NVH refinement which includes road induced noise. Work done in the past, enumerates testing methods, excitation technique applied and boundary conditions. It also includes Mode shapes, analysis results and study of variables affecting the modal performance of passenger car Tire. Here, in this paper an attempt is made to compare the experimental modal analysis results, obtained using two different excitation techniques for exciting tire. In the experimental modal analysis under discussion, the passenger car tire of type 175/65R14, was inflated up to 2.2 bar (32psi) pressure in free-free condition. Impact Hammer and Electro-dynamic shaker were used to excite the tire structure in radial direction. Single Input Multiple Output technique was used for excitation and response signal acquisition.

The direct injection common rail technology coupled with variable geometry turbocharger on the modern diesel engine has improved the diesel engine performance (power and torque) greatly as compared to the conventional diesel engine. Diesel engine performance is greatly dependent on the abundant air availability. And it is facilitated by Variable Geometry Turbocharger (VGT) in modern engines. The engines with variable geometry turbocharger offer quick response to the demand in various driving conditions especially in transient driving conditions. During transient driving conditions, the air intake system experiences a rapid air flow pressure and velocity changes. The pressure differentials across air intake system during transient events allow flow direction changes in the system. This kind of phenomenon generates unusual “Multiple Whoosh” noises in the air intake system of the sport utility vehicle engine.

Comfortable cabin environment from temperature, noise and vibration point of view is one of the most desirable aspects of any vehicle operating in hot or cold environment. Noise generated from HVAC system is one of the most irritating phenomena resulting in customer dissatisfaction and complaints. It becomes absolutely necessary to have low HVAC noise levels when the target market has hot weather all round the year. Balance between control of temperature in desired way with least possible noise and vibration is the key for HVAC performance optimization within constrains posed by design and cost. This paper describes the approach for NVH refinement of front HVAC system proposed for a vehicle with limited off-road capability for which packaging constraints and late changes related to airflow and HVAC unit design for meeting comfort and crash requirements resulted in deterioration of noise and vibrations while operation.

Success of the vehicle in the market depends on comfort provided while usage, which also include level of noise, vibration and harshness (NVH). In order to achieve good cabin comfort, the NVH levels have to be as low as possible. Powertrain is main source of NVH issues on vehicle and typically mounted on vehicle using rubber isolators. The dynamic characteristics of rubber isolators play vital role in reducing the vibrations transfer from powertrain to vehicle structure while operation and during dynamic conditions. Traditionally, isolators are manufactured using Natural Rubber (NR) to meet functional requirements which include vibration isolation and durability. At times either of above requirements has to be compromised or sacrificed due to the limitation in compounding process and other practical problems involved with manufacturing of rubber parts.

NVH performance of powertrain [PT] is a critical parameter for vehicle NVH refinement. Ingress of PT-radiated noise to the cabin can be restricted by blocking the air born noise paths using combination of sealing, shielding and absorption. Isolation of vibrations to the body is achieved by soft rubber-mounting of PT at idling and low speeds. At higher speeds, when PT-support brackets, Frame, Body and other driveline components go into self-resonance, isolation provided by the rubber-mounts have limitations. Control of excitation at source itself will be a solution on this background [1]. In presence of strong transfer paths through driveline support, a direct correlation between flexural modes of PT and In-cab booms can be observed during vehicle operation [2]. Current work presents an overview and approach for refinement of PT including use of front-loading technique in the early design stage for modal refinement, testing and correlation.