Search Results

The benefits associated with the use of oxygen-containing diesel fuels in passenger cars are quite well described in the literature. This work describes the results of an 18-meter EEV city bus fueled with diesel fuel with the addition of 10% v/v of triethylene glycol dimethyl ether. This compound was chosen because it was effective in reducing exhaust emissions from light duty diesel vehicles. Emission tests (CO, HC, NOx and PM) of the city bus were performed over SORT (Standardized On-Road Tests) cycles using portable exhaust gas analyzers - PEMS. Significant differences in the emission of exhaust components were observed in individual SORT cycles. The level of road emissions reduced as the traffic smoothness increased, i.e. from the SORT 1 to SORT 3 cycle. The largest reduction in bus emissions associated with the use of the oxygenated additive (triethylene glycol dimethyl ether) applies to carbon monoxide and ranges from 50% for the SORT 3 cycle up to 90% for the SORT 1.

Non-Road machines constitutes a large group of machines designed for various tasks and mainly using CI engines for propulsion. This category includes vehicles with drive systems of a maximum capacity of several kilowatts as well as with drives with a capacity of up to thousands of kilowatts depending on the purpose of the machine. Within this group, mobile machines referred to as NRMM (Non-Road Mobile Machinery) stand out. Numerous studies of scientific institutions in Europe and around the world have proven the differences between the exhaust emissions tested in type approval tests and the actual emissions in this group of vehicles. They result from differences in operating points (crankshaft speed and load) of engines during their operation. A big problem is also their considerable age and degree of wear. Approval standards themselves are less stringent than those of heavy-duty vehicles (HDVs), although the engines have similar design and performance.

The paper describes the measurement of PM emission from an excavator engine under actual operating conditions. The exploration of the relations between the engine operating parameters and its emissions requires measurements under actual conditions of engine operation. The specificity of the emission measurements, PM in particular, requires technologically advanced measuring devices. The situation gets even more complicated when, beside the PM mass. The particle size distribution and number (PN) also need to be measured. An important technical issue is the difficulty in fitting the measurement equipment in/on the vehicle in operation (e.g. excavator), which is why the presented investigations were carried out in a laboratory under simulated operation. The laboratory technicians applied load to the engines through the excavator hydraulic system.

The paper presents an analysis of the emission level from a heavy-duty truck of the GVW of 12,000 kg. The exhaust emission tests were performed under actual traffic conditions in the area of Poznań. For the tests portable exhaust emission analyzers SEMTECH DS and AVL Micro Soot Sensor were used. The characteristics of the exhaust emission components have been determined in relation to the engine speed and load as well as vehicle parameters (speed and acceleration). The paper includes an analysis of the engine operating conditions as well as the range of engine speeds and engine loads. The vehicle fuel consumption was also determined through the carbon balance method. Based on the obtained values of the emission of CO, NOx and PM, the emission indexes were determined that provided information on the relation of the measured emissions to the levels specified in the EEV standard. The emissions of all the exhaust components, except NOx were lower than the EEV limits.

The paper discusses the measurement of the PM emissions from non-road vehicles (a farm tractor and an excavator) under actual operating conditions. Full exploration of the relations between the operating parameters of these vehicles and their emissions requires measurements under actual conditions of their operation. The specificity of the emission measurements, PM in particular, requires technologically advanced measuring devices. The situation gets even more complicated if, beside the PM mass, we also wish to obtain the PM size distribution and particle number (PN). One of the more important technical issues is the difficulty in fitting of the measurement equipment in/on the vehicle in operation (e.g. a farm tractor). That is the reason why the investigations were carried out in a laboratory. The laboratory technicians applied load to the engines through external devices - a hydraulic system for the excavator and a brake coupled to the farm tractor power takeoff.

The tests related to the exhaust emissions from non-road vehicles are currently performed on a chassis dynamometer under the name of NRSC (ISO 8178) and NRTC. In light of the growing requirements related to the environment protection in transport the authors recommend determining the exhaust emissions through real vehicle operating conditions. The tests carried out under real operating conditions could be used for the process of optimization of future power trains of regular road vehicles and non-road vehicles. What is more, these tests should be taken into account in the works on the changes of the legislation related to the emission limits from combustion engines. The paper presents the results of the tests on the exhaust emissions from an agricultural harvester engine and a tractor engine in real operating conditions. The harvester operation during the test consisted in crops collection from the field and the tractor operation during the test consisted in plowing.

The paper addresses the problem of toxic emission from non-road vehicles. The paper presents the results of the investigations and analyses related to the engine operating conditions of a selected group of non-road vehicles. The presented tests have been carried out on a large groups of vehicles - several from each representative group. This was chiefly on-site construction machinery (dump tracks, excavators, bulldozers) used in the construction of the motorway and as an auxiliary equipment in an open-cast mine. An analysis has been performed based on which a range of the most frequently used loads and engine speeds was determined. The obtained time density characteristics (distribution of speeds and loads in time) of the engines was compared to the measuring points of the toxic emission homologation cycle.

The investigations into the emissions from light-duty vehicles have been carried out on a chassis dynamometer (NEDC test in Europe and FTP75 test in the US). Such tests do not entirely reflect the real road conditions and that is why we should analyze the correlation of the laboratory versus on-road test results. The paper presents the on-road test results obtained in an urban and extra urban cycles. For these measurements a portable SEMTECH DS analyzer by SENSORS has been used. The device is an analyzer enabling an on-line measurement of the emission gases concentration in a real driving cycle under real road conditions. The road tests were performed on road portions of several kilometers each. The obtained results were compared with the results obtained for the same vehicle during the NEDC test on a chassis dynamometer. The comparative analysis was performed including the urban and extra-urban cycles.