Search Results

The present social context imposes effective reductions of transport greenhouse gases and pollutant emissions. To answer to this demand, car manufacturers adopted technologies such as downsizing, turbocharging, intense in-cylinder aerodynamics and diluted combustion process. In this context, to master mixture ignition is crucial to ensure an efficient heat release. To get to a clearer knowledge about the physics holding early stages of premixed mixture combustion, the PRISME institute in the framework of the French government research project ANR MACDOC generated a consistent experimental database to study ignition and spherical flame propagation processes in a constant volume vessel in laminar and turbulent environment.

Diesel engine pollutant emissions legislation is becoming more and more stringent. New driving cycles, including increasingly severe transient engine operating conditions and low ambient-temperature conditions, extend considerably the engine operating domain to be optimized to attain the expected engine performance. Technological innovations, such as high pressure injection systems, Exhaust Gas Recirculation (EGR) loops and intake pressure boosting systems allow significant improvement of engine performance. Nevertheless, because of the high number of calibration parameters, combustion optimization becomes expensive in terms of resources. System simulation is a promising tool to perform virtual experiments and consequently to reduce costs, however models must account for relevant in-cylinder physics to be sensitive to the impact of technology on combustion and pollutant formation.

Due to more and more complex powertrain architectures and the necessity to optimize them on the whole driving conditions, simulation tools are becoming indisputable for car manufacturers and suppliers. Indeed, simulation is at the basis of any algorithm aimed at finding the best compromise between fuel consumption, emissions, drivability, and performance during the conception phase. For hybrid vehicles, the energy management strategy is a key driver to ensure the best fuel consumption and thus has to be optimized carefully as well. In this regard, the coupling of an offline hybrid strategy optimizer (called HOT) based on Pontryagin’s minimum principle (PMP) and an online equivalent-consumption-minimization strategy (ECMS) generator is presented. Additionally, methods to estimate the efficiency maps and other overall characteristics of the main powertrain components (thermal engine, electric motor(s), and battery) from a few design parameters are shown.

IFP Energies nouvelles (IFPEN) has a large experience in the development of engine simulation platforms. During the last decade, the Dual Flame Model (DFM), a physical 0-dimensional (0D) combustion model designed for Diesel applications, was developed and continuously improved. The DFM formalism allows to represent quite precisely the in-cylinder combustion process scenario, by accounting for the first order relevant physics impacting fuel oxidation. First of all, this allows to account for the impact of engine actuators on combustion (e.g. injection systems performing complex injection strategies, Low Pressure and High Pressure EGR loops,…) and then to describe the pollutant emissions formation processes, being chemical kinetics strongly dependent on the in-cylinder thermochemical conditions. The aim of this communication is to present the potential of using the DFM model in the different stages of a Diesel engine development process for pollutant emissions optimization.

Legal constraints concerning CO2 emissions have made the improvement of light duty vehicle efficiency mandatory. In result, vehicle powertrain and its development have become increasingly complex, requiring the ability to assess rapidly the effect of several technological solutions, such as hybridization or internal combustion engine (or ICE) downsizing, on vehicle CO2 emissions. In this respect, simulation is nowadays a common way to estimate a vehicle's fuel consumption on a given driving cycle. This estimation can be done with the knowledge of vehicle main characteristics, its transmission ratio and efficiency and its internal combustion engine fuel consumption map. While vehicle and transmission parameters are relatively easy to know, the ICE consumption map has to be obtained through either test bench measurements or computation.

The Diesel engine has now become a vital component of the transport sector, in view of its performance in terms of efficiency and therefore CO2 emissions some 25 % less than a traditional gasoline engine, its main competitor. However, the introduction of more and more stringent regulations on engine emissions (NOx, PM) requires complex after-treatment systems and combustion strategies to decrease pollutant emissions (regeneration strategies, injection strategies, …) with some penalty in fuel consumption. It becomes necessary to find new ways to improve the Diesel efficiency in order to maintain its inherent advantage. In the present work, we are looking for strategies and technologies to reduce Diesel engine fuel consumption. Based on the observation that large Diesel engines have a better efficiency than the smaller ones, a detailed thermodynamic combustion analysis of one Heavy Duty (HD) engine and two Passenger car (PC) engines is performed to understand these differences.

Regulations in terms of pollutant emissions are becoming more and more constraining. The car manufacturers need to adopt a global optimisation approach of engine and exhaust after-treatment systems. An engine architecture definition coupled to an adapted control strategy seem to be an ideal way to address this issue. The problem is particularly complex, considering the trade off between the drivability which must be maintained, the reduction of the in-cylinder pollutant emissions, the reduction of the fuel consumption and the optimisation of the operating conditions to reach high conversion efficiencies via exhaust gas after-treatment systems. Sophisticated control strategies and models can only be developed with a complete understanding of the physical phenomena occurring in the combustion chamber, thanks to experimental measurements and engine system simulations.

In order to meet the CO₂ challenge, today a wide variety of solutions are developed in the automotive industry such as advanced technologies (downsizing, VVA, VCR), new combustion modes (HCCI, stratified and lean combustion), hybridization, electrification or alternative fuels. Furthermore, couplings between these solutions can be envisaged, increasing considerably the number of degrees of freedom which have to be accounted for in the development of future powertrains. Consequently, for time and cost reasons, it is not obvious to evaluate and optimize the full potential of new concepts only by the mean of experimental investigation. In this context, system simulation appears as a powerful and relevant complement to engine tests for its flexibility and its high CPU efficiency. This paper focuses on the development of a methodology combining both simulation and experimental tools to quantify the interest of innovative solutions in the very first steps of their development.

Due to increasingly stringent regulations, reduction of pollutant emissions and consumption are currently two major goals of the car industry. One way to reach these objectives is to enhance the management of the engine in order to optimize the whole combustion process. This requires the development of complex control strategies for the air and the fuel paths, and for the combustion process. In this context, engine 0D modelling emerges as a pertinent tool for investigating and validating such strategies. Indeed, it represents a useful complement to test bench campaigns, on the condition that these 0D models are accurate enough and manage to run quite fast, eventually in real time. This paper presents the different steps of the design of a high frequency 0D simulator of a downsized turbocharged Port Fuel Injector (PFI) engine, compatible with real time constraints.

The powertrain simulation tools are nowadays an efficient support to optimize cost and duration of the whole engine technological developments. They can deliver optimized simulator versions for various targets such as system understanding, design investigation, non-measurable value access or virtual bench use for control and calibration. Under the condition of an accurate modelling and simulation know-how to take into account the simulator using constraints, the simulation can become an undisputable support for powertrain design as the test bed already is. The goal of this paper is to present the large range of the powertrain simulation capabilities for the specific application of a downsized turbocharged GDI engine with twin VVT embedded in a concept car. The modelling framework is first presented and different items are laid-out. A first part is dedicated to the engine air path and in particular to the modelling of gas exchange phenomena such as back-flow.