Search Results

Previous research to understand the mechanism for piston deposit formation in the Sequence IIIG engine test has focused on characterizing the piston deposits. These studies concluded that, in addition to lubricant derived materials, Sequence IIIG piston deposits contain a significant amount of fuel-derived carbonaceous material. The presence of fuel degradation by-products in Sequence IIIG deposits shows that blow-by is a significant contributor to deposit formation. However, blow-by can either assist in the degradation of the lubricant or can simply be a source for organic material which can be incorporated into the deposits. Therefore, a series of modified Sequence IIIG engine tests were conducted to better determine the effect of blow-by on deposit formation. In these studies deposit formation on different parts of the piston assembly were examined since different parts of the piston assembly are exposed to different amounts of blow-by.

In the next ILSAC passenger car motor oil specification the Sequence IIIG engine test, as well as two versions of the Thermo-Oxidation Engine Oil Simulation Test (TEOST) have been proposed as tests to determine the ability of crankcase oils to control engine deposits. The Sequence IIIG engine test and the TEOST MHT test are designed to assess the ability of lubricants to control piston deposits and the TEOST 33 test is designed to assess the ability of lubricants to control turbocharger deposits. We have previously characterized the chemical composition of Sequence IIIG piston deposits using thermogravimetric, infrared and SEM/EDS analyses. Sequence IIIG piston deposits contain a significant amount of carbonaceous material and the carbonaceous material is more prevalent on sections of the pistons that should encounter higher temperatures. Furthermore, the carbonaceous material appears to be a deposit formed by the Sequence IIIG fuel.

Deposit formation is an issue of great significance in a broad range of applications where lubricants are exposed to high temperatures. Lube varnish causes valve-sticking, bearing failure and filter blockage which can lead to considerable equipment downtime and high maintenance costs. Recently this has become a pressing issue in the stationary power generation industry. In order to investigate the chemistry leading to varnish, three samples of varnish-coated components from the lube/hydraulic systems of gas turbines from the field were obtained, along with information on the commercially available formulated oils which were used. Samples of these three fresh oils were analysed by a variety of chromatographic and spectroscopic techniques, which confirmed chemical identity of aminic and/or phenolic antioxidants, corrosion inhibitors and antiwear components. The varnish-coated turbine components were also investigated by these methods.

In the latest passenger car motor oil specifications the Sequence IIIG engine test is used to determine the ability of lubricants to control piston deposits. We have analyzed the chemical composition of Sequence IIIG deposits in order to determine the source of the piston deposits and determine if the mechanism for deposit formation in the Sequence IIIG engine test is similar to previously published mechanisms for formation of high temperature engine deposits. These previous mechanisms show that combustion by-products react with lubricant in the piston ring zone. The mixture of combustion by-products and lubricant are oxidized to form deposit precursors which are further oxidized to form deposits. Since the Sequence IIIG engine test uses lead-free fuel it is important to reexamine the nature of piston deposits formed in gasoline engines and in particular in the Sequence IIIG engine test.