Search Results

The onset of aerodynamic instabilities in proximity of the left margin of the operating curve represents one of the main limitations for centrifugal compressors in turbocharging applications. An anticipated stall/surge onset is indeed particularly detrimental at those high boost pressures that are typical of engine downsizing applications using a turbocharger. Several stabilization techniques have been investigated so far to increase the rangeability of the compressor without excessively reducing the efficiency. One of the most exploited solutions is represented by the use of upstream axial variable inlet guide vanes (VIGV) to impart a pre-whirl angle to the inlet flow. In the pre-design phase of a new stage or when selecting, for example, an existing unit from an industrial catalogue, it is however not easy to get a prompt estimation of the attended modifications induced by the VIGV on the performance map of the compressor. A simplified model to this end is presented in the study.

In the present automotive research, increasing efforts are being directed to improve the overall organic efficiency, which, inter alia, means to improve the operational behavior of the auxiliary organs. This paper reports an experimental approach for the determination and analysis of the pressure distribution in a variable displacement vane pump for high speed internal combustion engine lubrication. More in details, an actual application is presented for a seven-blades variable displacement vane pump equipped with a hydraulic geometry variation system. This unit is characterized by a high performance, in terms of rotational speed, delivery pressure and displacement variation. The experimental layout and some relevant facilities are described. An extended test campaign was performed on the pump to characterize its operational behavior.

In this paper a detailed analysis focused on lumped parameters numerical modeling of a variable displacement vane pump for high speed internal combustion engine lubrication is presented and discussed. This particular volumetric unit is characterized by very extreme performance, both in terms of rotational speed, delivery pressure and displacement variation. First of all, a comprehensive description of the simulation environment properly tailored for the numerical modeling of the vane pump operation is introduced and all its geometric, kinematic and fluid-dynamic characteristics are described in depth. Then, the results coming from an exhaustive experimental campaign have been compared with simulations, finding a general good accordance that demonstrates the reliability of this numerical approach.