Search Results

Vehicle fire investigators sometimes use the existence and location of thermally damaged wiring (arced, shorted, melted, & beaded) discovered in a post burn analysis of a vehicle as an indication of the fire origin and its cause. One systematic method of analysis is to use the process of arc mapping. To examine the reliability of arc mapping in motor vehicle fires, two full scale burn demonstrations were conducted on 2013 Ford Fusions. Both vehicles had similar fire origins artificially initiated in the interior of the vehicles near the driver’s front seat. The engines were running and all accessories were off. During the burn sequence, occurrences of fire induced unintended electrical activity were captured with video and still photography. Examples of this unintended activity include lights, horn, wipers, and decklid latch activation. The burn concluded when the measured battery voltage went to zero in demonstration 1.

Four full scale burn tests on aluminum body Ford F-150’s were conducted with four unique origins. The purpose of these burn tests was to determine if the origin of the fire could be accurately identified after the vehicle fires progressed to near complete burn (with near absence of the aluminum body panels). The points of origin for the four burn tests were: 1) Engine Compartment - driver’s side front of engine compartment, 2) Passenger Compartment - Instrument panel, driver’s side near the headlamp switch, 3) Passenger Compartment - passenger side rear seat, 4) Outside of Vehicle - passenger side front tire. Photographic, video, and temperature data was recorded to document the burn process from initiation to extinguishment. Post-fire analysis was conducted in an attempt to determine the origin of the fire based solely on the burn damage.