Search Results

Based on a composed PRF/ethanol/PAH mechanism, simulations were conducted to investigate the combustion characteristics of n-heptane spray under premixed ethanol/air and iso-octane/air atmosphere in a combustion vessel. The effects of premixed ethanol and iso-octane on ignition delay, important soot precursors and soot volume fraction of n-heptane spray were studied. Also, simulated results with and without considering the cooling effects of premixed fuel vaporization were compared. When the cooling effect of premixed fuel vaporization was not considered, simulations showed that premixed ethanol could increase the ignition delay of n-heptane spray at ambient temperatures below 850K. However, premixed iso-octane showed little inhibition effect on ignition of n-heptane spray. Also, it was found that both premixed ethanol and iso-octane contributed to faster ignition under high ambient temperatures.

Problems such as higher heat load in the diesel engine and the occurrence of crazes within the valve bridge of heavy-duty vehicle diesel engine should be solved, with the increase of the power density of heavy-duty vehicle diesel engine. In this paper, the heat load experiment of complete machine, temperature-measuring of bottom part of cylinder head and the three-dimension numerical simulation on coolant flow and heat transfer in the water jacket have been performed. The result shows that the main reasons of higher heat load of the engine are insufficiency of heat-sinking capability of the water-radiator and shortage of coolant flux; and the unsuitable flow field in water jacket in cylinder head, where only a little of the coolant can cool the bottom of cylinder head, is the main cause of cylinder head bottom over-heated and thermal crack in the valve-bridge region.