Search Results

In this paper, a simplified prediction model for aiming to design an engine control system of Homogeneous Charge Compression Ignition (HCCI) engine has been developed. Developed HCCI engine model is for rebreathing concept and employs the discretized cycle concept to realize fast calculation speed. The ignition timings are predicted by Livengood-Wu integration combined with a function of ignition delay and the combustion durations are predicted from supplied fuel mass quantity. Maximum pressure and its phase are compared to experiments. In addition, for designing an HCCI engine, the models to predict appropriate operation conditions are considered.

To determine the auto-ignition and combustion mechanisms and the components of syngas that are applicable to homogeneous charge compression ignition (HCCI) engines, the combustion characteristics and the chemical reaction process in an HCCI engine were studied numerically and experimentally using mock syngas with various mixtures of the fuel components. The mock syngas consisted of hydrogen (H2) and carbon monoxide (CO) as the main combustible components, nitrogen (N2) and carbon dioxide (CO2) as incombustible components and a small amount of methane (CH4), assuming the composition of the gas was produced from wood by thermochemical conversion processes. The oxidation reaction process was analyzed numerically using CHEMKIN-PRO. Further experiments were conducted to investigate the validity of the calculated results. Primarily, the effects of hydrogen and carbon monoxide on auto-ignition and combustion were investigated.

This paper discusses research activities at the Technische Universität München on the HCCI combustion process, focusing on the development of a model-based control concept with pressure indication. As a first step sensitivity analyses have been carried out to investigate influences of different injection strategies on the combustion and emission characteristics. An optimal injection strategy has been determined and reasonable control variables and ranges corresponding to this strategy were defined. Comprehensive steady-state measurements have been conducted to detect the engine characteristics. In order to limit the experimental effort, principles of DoE (Design of Experiments) have been used to define a methodological approach in the planning of the measurements. Afterwards a multiple-input multiple-output engine model including boundary models for input settings has been designed out of the measurement results.

For the next stage of Homogeneous Charge Compression Ignition (HCCI) engine researches, the development of an engine controller, taking account of dynamics is required. The objective of this paper is to develop dynamic multi input and multi output HCCI engine models and a controller to deal with variable valve lift, variable valve phase, and fuel injection. First, a physical continuous model has been developed. This model mainly consists of air flow models, an ignition model, and a combustion and mechanical model of the engine. The flow models use a receiver model on volumetric elements such as an intake manifold and a valve flow model on throttling elements such as intake valves. Livengood-wu integration of Arrhenius function is used to predict ignition timing. The combustion duration is expressed as a function of ignition timings.

This study aims to develop a small size gas engine system with biomass gas by modifying the control system of a conventional spark ignition engine. In this paper, combustion characteristics of typical biomass gas assuming the wood chip pyrolysis gas, whose lower heating value was about 1/6 of the city gas in Japan, were investigated. Engine control system for biomass gas was also examined. It was confirmed that simulated biomass gas could achieve high thermal efficiency and stable combustion for wide range equivalence ratio without knocking and at low emissions. Automatic engine operation with real time in-cylinder gas pressure analysis was also tried under fuel composition change.