Search Results

To enable better matching of Diesel Oxidation Catalyst (DOC) properties to aftertreatment system and application requirements, a systematic evaluation of the effects of sulfur poisoning and desulfation was undertaken on a number of Heavy Duty DOC formulations at representative Platinum Group Metal (PGM) loadings. Uniformly coated DOCs having PGM ratios from 1/0 Pt/Pd to 0/1 Pt/Pd with commercial HDD DOC washcoats were evaluated on a Tier 3 Non-Road engine. In addition, a new DOC formulation intended for reduced sulfur sensitivity, a DOC containing zeolite for hydrocarbon (HC) adsorption, and a layered DOC containing both high and low Pt/Pd ratio layers were compared. Two levels of PGM loading were included for three of the uniform sample formulations.

Non-road Tier 4 Final emissions standards offer opportunities for engines to be certified with DOC + SCR aftertreatment systems (ATS), where particulate matter (PM) emissions will be controlled by engine measures. These non-filter systems will not experience high thermal conditions common for filter regeneration and, therefore, will not have the secondary benefit of thermal events removing sulfur from the DOC and SCR aftertreatment. An experimental program was conducted on DOC + SCR systems in which the DOC was selected for the anticipated NO2 and sulfur management requirements of a fixed volume of 3 SCR types (vanadia, copper and iron). Each system was optimized to NOx conversion levels of 90%+ on NRTC cycles then exposed to accelerated sulfur poisoning and various cycles of increasing temperature after each poisoning to observe the performance recovery of the system. Specific sulfur management strategies are defined, depending on technology.