Search Results

Visions of lunar outposts often depict a collection of fixed elements such as pressurized habitats, in and around which human inhabitants spend the large majority of their surface stay time. In such an outpost, an efficient deployment of environmental control and life support equipment can be achieved by centralizing certain functions within one or a minimum number of habitable elements and relying on the exchange of gases and liquids between elements via atmosphere ventilation and plumbed interfaces. However, a rigidly fixed outpost can constrain the degree to which the total lunar landscape can be explored. The capability to enable widespread access across the landscape makes a lunar architecture with a high degree of surface mobility attractive. Such mobility presents unique challenges to the efficient deployment of environmental control and life support functions in multiple elements that may for long periods of time be operated independently.

NASA's Constellation Program, which includes the mission objectives of establishing a permanently-manned lunar Outpost, and the exploration of Mars, poses new and unique challenges for human life support systems that will require solutions beyond the Shuttle and International Space Station state of the art systems. In particular, the requirement to support crews for extended durations at the lunar outpost with limited resource resupply capability will require closed-loop regenerative life support systems with minimal expendables. Planetary environmental conditions such as lunar dust and extreme temperatures, as well as the capability to support frequent and extended-duration Extra-vehicular Activity's (EVA's) will be particularly challenging.

NASA is engaged in early architectural analyses and trade studies aimed at evaluating operations concepts, identifying requirements, predicting performance and resource needs, characterizing mission constraints and sensitivities, and guiding technology development planning that will be needed to conduct a successful human exploration campaign of the lunar surface. Conceptual architectures and resource estimates for environmental control and life support systems (ECLSS) within pressurized lunar surface habitats, logistics modules, and rovers have been developed and compared in order to support these lunar campaign studies. This paper will discuss some of those concepts and some of the more noteworthy considerations that will likely remain as key drivers in the evolution of the lunar surface ECLSS architecture.

NASA is completing the development of a regenerative water recovery system (WRS) for the International Space Station (ISS). The major assemblies included in this system are the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA). Test activities have been completed for the system and planning for launch and on-orbit activation is underway. This paper summarizes the status as of April 2008 and describes some of the technical challenges encountered and lessons learned over the past year.

NASA is developing a regenerative water recovery system (WRS) for deployment on the International Space Station (ISS). The major assemblies included in this system are the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA). The WPA has been developed by Hamilton Sundstrand Space Systems International (HSSSI), Inc., while the UPA has been developed by the Marshall Space Flight Center (MSFC). Test and verification activities have been completed for the system and planning for launch and on-orbit activation is underway. This paper summarizes the status as of April 2007 and describes some of the technical challenges encountered and lessons learned over the past year.

NASA is developing three racks containing regenerative water recovery and oxygen generation systems (WRS and OGS) for deployment on the International Space Station (ISS). The major assemblies included in these racks are the Water Processor Assembly (WPA), Urine Processor Assembly (UPA), Oxygen Generation Assembly (OGA), and the Power Supply Module (PSM) supporting the OGA. The WPA and OGA were developed by Hamilton Sundstrand Space Systems International (HSSSI), Inc. while the UPA and PSM were developed by the NASA Marshall Space Flight Center (MSFC). Test and verification activities have been completed for the WRS and OGS systems and planning for launch and on-orbit activation is underway. This paper summarizes the status as of April 2006 and describes some of the technical challenges encountered and lessons learned over the past year.

NASA is developing three racks containing regenerative water recovery and oxygen generation systems (WRS and OGS) for deployment on the International Space Station (ISS). The major assemblies included in these racks are the Water Processor Assembly (WPA), Urine Processor Assembly (UPA), Oxygen Generation Assembly (OGA), and the Power Supply Module (PSM) supporting the OGA. The WPA and OGA are provided by Hamilton Sundstrand Space Systems International (HSSSI), Inc., while the UPA and PSM are developed in-house by the Marshall Space Flight Center (MSFC). The assemblies have completed the manufacturing phase and are in various stages of testing and integration into the flight racks. This paper summarizes the status as of April 2005 and describes some of the technical challenges encountered and lessons learned over the past year.

The baseline environmental control and life support (ECLS) systems currently deployed on board the International Space Station (ISS) and that planned to be launched in Node 3 are based upon technologies selected in the early 1990's. While they are generally meeting or exceeding requirements for supporting the ISS crew, lessons learned from years of on orbit and ground testing, together with new advances in technology state of the art, and the unique requirements for future manned missions prompt consideration of the next logical step to enhance these systems to increase performance, robustness, and reliability, and reduce on-orbit and logistical resource requirements. This paper discusses the current state of the art in ISS ECLS system technologies, and identifies possible areas for enhancement and improvement.

The International Space Station (ISS) Node 3 includes a substantial amount of equipment to support a variety of Environmental Control and Life Support System (ECLSS) functions. This includes a combination of equipment items that are common with ECLSS equipment distributed throughout other ISS pressurized elements and other equipment that is unique to Node 3. Common equipment provides non-regenerative ECLS functions of atmosphere control and supply (ACS), temperature and humidity control (THC), fire detection and suppression (FDS), and waste management (WM) for Node 3 and/or attached elements. Additional equipment provides air revitalization (AR) and water recovery and management (WRM) functions that are necessary for station-level redundancy, but in a manner that allows for the minimization of life support logistics burdens.

The Air Evaporation water recovery system is a viable candidate for Space Station application. A four-man Air Evaporation open cycle system has been successfully demonstrated for waste water recovery in manned chamber tests. The design improvements described in this paper greatly enhance the system operation and energy efficiency of the air evaporation process. A state-of-the-art wick feed design which results in reduced logistics requirements is presented. In addition, several design concepts that incorporate regenerative features to minimize the energy input to the system are discussed. These include a recuperative heat exchanger, a heat pump for energy transfer to the air heater, and solar collectors for evaporative heat. The addition of the energy recovery devices will result in an energy reduction of more than 80 percent over the systems used in earlier manned chamber tests.