Search Results

In the past decade, various Plug-in Hybrid Electric Vehicles have been demonstrated which offer the potential of a significant reduction in fuel consumption and emission. However, this capability strongly depends on the sizing of the components, driver's usage profile and the quality of the energy management. These challenges require new optimization procedures for a systematical exploration of the design space with the objective of an optimal powertrain configuration. A novel optimization strategy based on a multi-objective problem formulation is proposed. The optimization procedure consists of a multi-objective genetic algorithm for determining the best design parameters with respect to fuel consumption and driving performance. The approach is combined with an analytical optimal control problem to find the optimal continuous and discrete control trajectories for the energy management.

In this paper an energy management is proposed which is optimal to certain driving scenarios which can be clustered into freeway, rural and urban situations. This strategy is non-predictive but uses information about the current driving situation provided by modern navigation systems to identify the current road type. Based on this information a set of simplified optimal control problems are solved offline via an indirect shooting algorithm. By relaxation of the problem formulation, the solutions of these optimal control problems can be stored into easily implementable maps. The energy management control is then determined from these maps during vehicle operation using the current road type, the vehicle speed and the required wheel-torque. The strategy is implemented in a dSPACE MicroAutoBox and validated on a near mass-production vehicle. The proposed methodology has shown fuel savings on a real world drive cycle.

Most energy management systems for hybrid electric vehicles still use rule-based energy management systems that rely on information stored in lookup tables, to define the current mode of operation and set-points for the low-level control laws. Because of the high number of parameters, the calibration of such energy managements can be a cumbersome task for the engineers. Mathematical tools are therefore inalienable to the calibration process. In this paper, it will be demonstrated, how the theory of hybrid optimal control can be used to calculate an initial parameter set for the energy management of charge-sustaining hybrids. The calculation procedure includes the solution of a hybrid optimal control problem to determine the controls for the optimal operation of the vehicle over a given cycle.

In this paper, a hybrid optimal control problem (HOCP) for the optimal heating of the three-way catalytic converter is solved. We propose a model for a hybrid vehicle that beneath State of Charge and fuel consumption includes thermal system states like engine cooling water temperature and catalytic converter temperature. Since models for noxious emissions with appropriate computational demand are not yet available for optimization purposes, an artificial state that resembles the emissions produced is introduced. A hybrid optimal control problem is then formulated for the beginning of the FTP-75 drive cycle whose target is to minimize the energy loss during the catalytic converter and engine cooling water heating phase. The corresponding input values to be optimized are continuous variables as ignition angle and cylinder charge as well as discrete decisions such as different injection schemes. As additional constraint, an upper limit is imposed on the artificial emissions state.

A trip-based energy management strategy for electric vehicles (EVs) is proposed. It can use deterministic routing information obtained from, nowadays, available navigation systems and determines stochastic descriptions of process uncertainties such as stop events as unpredictable disturbances. A dynamic programming algorithm is used to calculate the optimal control trajectories required to reach the target destination safely and to suggest the driver an optimal driving style to maximize the battery range. The algorithm is implemented on a rapid prototyping platform using MATLAB/Simulink. Simulations and experimental results obtained from an EV prototype car are presented.

In this paper optimal control problems for hybrid powertrain vehicles with different drive-modes are considered and solved using numerical techniques. This leads to the formulation of hybrid optimal control problems. The aim is to find optimal controls and optimal switchings between the drive-modes to minimize a cost function resembling fuel consumption. The problem is nonlinear and subject to constraints concerning both controls and state. The techniques include indirect methods as well as direct optimization methods. Efficiency and accuracy are evaluated for all methods using simulation studies. An experimental test on a near mass-production vehicle confirms the usability of the direct optimization approach.

The quality of the powertrain design has a significant impact on the fuel consumption and emissions of hybrid vehicles. Lack of experience with these relatively new technologies, the enormous variety of hybrid powertrain configurations, and the multitude of components make this area an ideal application for computer-based modeling and optimizations. Global optimization techniques have the advantage to explore systematically the design space to find the optimal configuration space. In this paper, a systematic procedure for an optimal design of hybrid powertrain configurations using an evolutionary algorithm is proposed. It will be shown that the design steps for parallel and power-split configurations are quite similar. This results in a computing approach with high synergy effects and the ability to exchange components seamless to compare different ‘virtual’ configurations.

In power-split configuration, the input power is split into two parts, one of which is transmitted from the internal combustion engine through one or more planetary gear(s) to the wheels. The other part is generated as electricity and passes through an electrical variator to assist the driving torque. The latter has the characteristic of poor efficiency. In this simulation study, a comparison among the input power-split, compound power-split, and two mode power-split are discussed. Output power-split is not mentioned in this paper due to its limited applicability in specific vehicles. The idea of selection of the electrical machines is explained: the speed and torque of electrical machines was taken into consideration for the required transmission ratios spread.

This paper proposes a current limits distribution control strategy for a parallel hybrid electric vehicle (parallel HEV) which includes an advanced powertrain concept with two electrical driving axles. One of the difficulties of an HEV powertrain with two electrical driving axles is the ability to distribute the electrical current of one high voltage battery appropriately to the two independent electrical motors. Depending on the vehicle driving condition (i.e., car maneuver) or the maximization of the entire efficiency chain of the system, a suitable control strategy is necessary. We propose an input-output feedback linearization strategy to cope with the nonlinear system subject to input constraints. This approach needs an external, state dependent saturation element, which translates the state dependent control input saturation to the new feedback linearizing input and therefore preserves the properties of the differential geometric framework.

Due to the integration of many interacting subsystems like hybrid vehicle management, energy management, distance management, etc. into the VCU platform the design steps for function development and calibration become more and more complex. This makes an aid necessary to relieve the development. Therefore, the aim of the proposed simulation-based development and calibration design is to improve the time-and-cost consuming development stages of modern VCU platforms. A simulation-based development framework is shown on a complex function development and calibration case study using an advanced powertrain concept with a plug-in hybrid electric vehicle (PHEV) concept with two electrical axles.