Search Results

Selective Catalytic Reduction (SCR) catalysts have been demonstrated as an effective solution for controlling NOx emissions from diesel engines. There is a drive to reduce the overall packaging volume of the aftertreatment system for these applications. In addition, more active SCR catalysts will be needed as the applications become more challenging: e.g. lower temperatures and higher engine out NOx, for fuel consumption improvements. One approach to meet the challenges of reduced volume and/or higher NOx reduction is to increase the active site density of the SCR catalyst by coating higher amount of SCR catalyst on high porosity substrates (HPS). This approach could enable the reduction of the overall packaging volume while maintaining similar NOx conversion as compared to 2010/2013 systems, or improve the NOx reduction performance for equivalent volume and NH3 slip.

The use of vanadia selective catalytic reduction (V-SCR) catalysts for NOX reduction from diesel engine exhaust is well known. These catalysts are also active for hydrocarbon (HC) and particulate matter (PM) oxidation. This dual functionality (oxidation and reduction) of V-SCR catalysts can help certain applications achieve the legislative limits with an improved margin. In this work, NOX reduction, HC and CO oxidation over V-SCR were studied independently and simultaneously in microreactor tests. The effect of various parameters (HC speciation, concentration, ANR, and NO₂/NOX ratio) was investigated and the data was used to develop a kinetic model. Oxidation of CO, C₃H₆, and n-C₁₀H₂₂ is first order in CO/HC, while C₇H₈ oxidation is less than first order in C₇H₈. All these reactions were zero order in O₂. Oxidation activity decreased in order: C₇H₈ ≻ n-C₁₀H₂₂ ≻ C₃H₆ ≻ CO. HC oxidation was inhibited by NH₃.

Aftertreatment devices are exposed to exhaust poisons from fuel, oil and coolant. Studies on fuel- and lubricant-based poisoning have been widely published. However, diesel oxidation catalyst (DOC) and catalyzed soot filter (CSF) performance after exposure to constituents of coolant is not fully understood. Exhaust gas recirculation (EGR) cooler failure can cause a coolant leak into the exhaust that can reach the exhaust aftertreatment system. Coolant contains elements that can cause deterioration of aftertreatment components. This study focuses on the poisoning effect of coolant on the performance of a DOC + CSF system. The coolant introduction simulates an engine failure such as an EGR cooler internal fracture. DOC NO oxidation, quenching and hydrocarbon (HC) slip control performance during active regenerations are evaluated after slow and after consecutive fast coolant introduction and compared to the performance before the coolant exposure.

Since early 2010, most new medium- and heavy-duty diesel vehicles in the US rely on urea-based Selective Catalytic Reduction (SCR) technology for meeting the most stringent regulations on nitrogen oxides (NOx) emissions in the world today. Catalyst technologies of choice include Copper (Cu)- and Iron (Fe)-based SCR. In this work, the performances of Fe-SCR and Cu-SCR were investigated in the most commonly used DOC + CSF + SCR system configuration. Cu-SCR offered advantages over Fe-SCR in terms of low temperature conversion, NO₂:NOx ratio tolerance and NH₃ slip, while Fe-SCR demonstrated superior performance under optimized NO₂:NOx ratio and at higher temperatures. The Cu-SCR catalyst displayed less tolerance to sulfur (S) exposure. Reactor testing has shown that Cu-SCR catalysts deactivate at low temperature when poisoned by sulfur.

Selective Catalytic Reduction (SCR) technology has been widely studied for removal of NOX from the exhaust of diesel engines. To design and optimize diesel engine aftertreatment systems including an SCR catalyst component, a reliable SCR model is a very useful tool, to aid in system integration and control algorithm testing. In this paper, the development of a one-dimensional numerical model for a Fe-Zeolite-based SCR catalyst (hydrothermally aged for 100 hours at 650°C in 10% H₂O in air) is presented, followed by its validation and application. The resulting model is capable of predicting NOX reduction efficiency under various operating conditions as a function of gas hourly space velocity (SV), temperature, NO₂/NOX ratio and NH₃ to NOX (ANR) ratios; NH₃ slip and N₂O formation are also correctly predicted by the model. Extensive validation of the model has been carried out against engine test data for both steady state light-off and the heavy-duty FTP transient cycle (HD-FTP).