Search Results

This paper aims to indicate the advantages and any drawbacks of high frequency alternating current (HFAC) power for vehicle auxiliary electrical systems. Generally, benefits of HFAC include efficient power distribution and transformation, space and weight saving and load galvanic isolation. In addition, HFAC bus topologies are distributed to the point of use, lending the system to easy fault detection. The paper is structured as follows: first, the main findings of the most relevant automotive HFAC studies are outlined. Next, an HFAC architecture is proposed which is compared to the existing 14V and proposed 42V centralised DC networks in terms of power distribution efficiency and wiring harness weight saving. For this analysis, the case study of a medium-sized passenger vehicle is considered, and a group of intermittent and continuous auxiliary loads with a cumulative power of 2.8kW.

The quantitative assessment and comparison of different hybrid vehicle options has traditionally been done on the basis of measuring or estimating the vehicle's fuel economy over predefined drive-cycles. In general, little or no consideration has been given to the more subjective and difficult to quantify vehicle requirements, such as trying to understand which derivative will be the most “fun” vehicle to drive. A lack of understanding in this area of vehicle performance sufficiently early within the development life-cycle so as to be in a position to influence the vehicle design, can lead to a compromised powertrain architecture which will ultimately increase the risk of product failure. The work presented within this paper constitutes part of the overall design activities associated with the LIFECar programme. The aim of the LIFECar consortium is to manufacture a lightweight, fuel cell hybrid electric sports vehicle.

With the increased interest in hybrid vehicle technology there is a need to investigate vast amounts of different hybrid vehicle topologies. Modelling and simulation plays an important role in this investigation process. In particular, modelling for controller development can quickly lead to model management and maintenance issues due to the variety of models required. The use of object oriented modelling languages can aid in plant model management by providing flexibility to different levels of users as well as reducing the number of separate plant models required for controller development. Two case studies are presented that illustrate some of the benefits gained from the object oriented modelling approach.

This paper gives an overview of the development of a number of loss models for the pushing metal V-belt CVT. These were validated using a range of experimental data collected from two test rigs. There are several contributions to the torque losses and new models have been developed that are based upon relative motion between belt components and pulley deflections. Belt slip models will be proposed based upon published theory, expanded to take account of new findings from this work. The paper introduces a number of proposals to improve the efficiency of the transmission based on redesign of the belt geometry and other techniques to reduce frictional losses between components. These proposed efficiency improvements have been modelled and substituted into a complete vehicle simulation to show improvements in vehicle fuel economy over a standard European drive cycle.

This paper describes the results of an investigation into alternative control strategies for diesel engines equipped with Exhaust Gas Recirculation (EGR) and Variable Geometry Turbocharging (VGT). The objectives of the research were to improve the engine aircharge performance during transient manoeuvres, thus bringing benefits for fuel economy, exhaust emissions and engine transient performance. Two of the investigated areas are detailed in this paper; The coordinated control of the EGR-VGT systems to improve transient airflow at low-speed, low-load operation Transient VGT control using exhaust pressure feedback A simple and effective method for coordinating the EGR-VGT system is demonstrated to improve airflow response to tip-ins and tip-outs. The exhaust pressure feedback method is shown to overcome difficulties in the transient control of VGT systems, offering improved engine torque response and reduced transient backpressure.

The Milner CVT is a patented [1] rolling traction transmission offering advantages of high power density and simplicity of construction and operation. A 90 mm diameter prototype variator is described which was sized for a maximum rated input power of 12 kW. Experimental data are presented demonstrating high efficiency and low shift forces. Resistance to overload torque is shown to be exceptional and preliminary durability trials indicate a highly viable concept for series production. Based upon the measured data, characteristics of larger variators are predicted and prospects for automotive applications discussed.

A mild hybrid powertrain with crankshaft mounted integrated motor generator (IMG) and torque controlled infinitely variable transmission (IVT) has shown clear potential for fuel economy (FE) enhancement. It also makes significant driveability and performance improvements possible which are a condition for customer satisfaction and subsequent marketability. The hybrid powertrain supervisory control strategy presented here uses the energy recovered during braking events for power assist, hence improving FE and driveability compromises. This is achieved by operating the engine at its best brake specific fuel consumption (BSFC) point during steady state conditions without deteriorating the transient response as a result of the comparatively fast IMG torque response. This paper demonstrates the launch manoeuvre and general driveability improvements achieved in simulation with validated models.

Hybrid electric vehicles (HEV) are considered as the most cost effective solution, in the short term perspective, for the achievement of improved fuel economy (FE) and reduced emissions. This paper focuses on regenerative braking in a mild hybrid powertrain with infinitely variable transmission (IVT) and specifically on how its control strategy can be formulated and optimized. The study is conducted using a previously validated fully dynamic powertrain model. An initial investigation of the dynamic vehicle behaviour under braking conditions serves as the basis for the development of a control strategy for best braking performance and maximum energy recovery, the implementation of which requires a fully active and integrated brake control system. Limitations and constraints due to driveline configuration and driveability issues are considered and their effect evaluated. Simulation results show that fuel consumption reductions of 12% are achievable along a standard drive cycle.

This paper introduces the work ongoing at the University of Bath in a series of projects aimed at characterising the driveability of CVT equipped vehicles and using the findings to help develop a strategy for a prototype powertrain controller during transient driving situations. Results of the driveability investigation of a first project in this series have already been published [1], where the driveability of three CVT vehicles was appraised. A follow-up project extends this work appraising more CVT vehicles and also comparing driveability aspects of CVT transmissions to conventional AT. The paper relates the common experimental part of the two projects showing linked results and describing how a simulation program can be used to predict and improve the driveability of the powertrain controller.

Many Diesel engine development programs concentrate almost exclusively on steady state investigations to benchmark an engines performance. In reality, the inter-action of an engine's sub-systems under transient evaluation is very different from that evident during steady state evaluation. The transient operation of a complete engine system is complex, and collecting test data is very demanding, requiring sophisticated facilities for both control and measurement. This paper highlights the essential characteristics of a Diesel engine when undertaking testbed transient manouevres. Results from simple transient sequences typical of on-road operation are presented. The tests demonstrate how transient behaviour of the engine deviates greatly from the steady state optimum settings used to control the engine.

The use of variable geometry turbocharging (VGT) as an aid to performance enhancement has been the subject of much interest for use in high-speed, light-duty automotive diesel applications in recent times (4). One of the key benefits anticipated is the improved transient response possible with such a device over the conventional fixed geometry turbine with wastegate. The transient responses of two different types of variable geometry turbocharger have been investigated on a dynamic engine test bed. To demonstrate the effect of the turbocharger on the entire system a series of step changes in engine load at constant engine speed were carried out with the turbocharger and exhaust gas recirculation (EGR) systems under the control of the engine management microprocessor. Results are presented which compare the different performance and emissions characteristics of the devices. Some control issues are discussed with a view to improving the transient response of both types.