Search Results

A theoretical study is conducted to examine the effects of oxygen enrichment of intake air and exhaust gas recirculation (EGR) on heavy-duty (HD) diesel engine performance characteristics and pollutant emissions. A phenomenological multi-zone model was properly modified and used to assess the impact of intake air oxygen-enhancement and EGR on the operating and environmental behavior of a HD diesel engine under various operating conditions. Initially, an experimental validation was performed to assess the predictive ability of the multi-zone model using existing data from a HD turbocharged common-rail diesel engine at the 12 operating points of the European Stationary Cycle (ESC) considering certain high-pressure cooled EGR rate at each operating point.

High efficiency, power concentration and reliability are the main requirements from Diesel Engines that are used in most technical applications. This becomes more important with the increase of engine size. For this reason the aforementioned characteristics are of significant priority for both marine and power generation applications. To guarantee efficient engine operation and maximum power output, both research and commercial communities are increasingly interested in methods used for supervision, fault-detection and fault diagnosis of large scale Diesel Engines. Most of these methods make use of the measured cylinder pressure to estimate various critical operating parameters such as, brake power, fuel consumption, compression status, etc. The results obtained from the application of any diagnostic technique, used to assess the current engine operating condition and identify the real cause of the malfunction or fault, depend strongly on the quality of these data.

The compression ignition engine of the dual fuel type has been employed in a wide range of applications utilizing various gaseous fuel resources, while minimizing soot and nitric oxide emissions without excessive increase in cost against that of the conventional direct injection diesel engine. Fumigated dual fuel compression ignition engines are divided into two main groups: the conventional dual fuel engines where part of the liquid fuel is replaced by gaseous one and the pilot ignited ones where a pilot amount of the liquid fuel is used as an ignition source. Due to the high auto-ignition temperature of the natural gas, it can be used as a supplement for the liquid diesel fuel in conventional diesel engines operating under dual fuel mode. Moreover, the use of natural gas as a supplement for the liquid diesel fuel could be a solution towards the efforts of an economical and clean burning operation.

Single Fuel Policy arose as a necessity in order to fulfill an effectiveness of the used equipment through the use of a single fuel in the battlefield. Thus, it was first ensured that the fuel's specification was standard with the equivalent commercial fuel which is still in use in the NATO countries and of course that the fuels' chemical characteristics allow it to be imported, stored, carried and distributed through the NATO oil piping system. So, in 1998 the NATO countries agreed to adopt the use of F-34 as a single fuel. Furthermore, the atmospheric pollution, which is one of the greatest problems that concerns especially the vehicle industries, drove the research on fuels to bio-fuels, like bio-diesel. Bio-diesel is an alternative fuel, which can be used by a diesel engine, even a military one, without a beforehand modification. It is produced by natural, renewable sources, like vegetable oil and animal fat.

During the last years a great effort has been made by many NATO nations to move towards the use of one military fuel for all the land-based military aircraft, vehicles and equipment employed on the military arena. This idea is known to as the Single Fuel Concept (SFC). The fuel selected for the idea of SFC is the JP-8 (F-34) military aviation fuel which is based upon the civil jet fuel F-35 (Jet A-1) with the inclusion of military additives possessing anti-icing and lubricating properties. An extended experimental investigation has been conducted in the laboratory of Thermodynamic and Propulsion Systems at the Hellenic Air Force Academy. This investigation was conducted with the collaboration of the respective laboratories of National Technical University of Athens and Hellenic Naval Academy as well.

With the increasing public interest in energy supply and the environment, attention has focused on the development of ecological and efficient combustion technologies. One of these technologies could be the use of natural gas as supplement fuel for diesel fuel in DI diesel engines. The great availability at attractive prices and the clean nature of combustion are the most important advantages of natural gas compared to conventional diesel fuel. In the present work are given theoretical and experimental results for the combustion mechanism of natural gas in a compression ignition environment, with special emphasis on the combined heat release rate of natural gas and diesel fuel, the duration of combustion and the ignition delay period. Results are also provided for the formation history of pollutants inside the combustion chamber of a DI diesel engine operating in dual fuel mode (with natural gas fuelling).

During the last years a great deal of efforts have been made to reduce pollutant emissions from Direct Injection Diesel Engines. The use of gaseous fuel as a supplement for liquid diesel fuel seems to be one solution towards these efforts. One of the fuels used is natural gas, which has a relatively high auto - ignition temperature and moreover it is an economical and clean burning fuel. The high auto - ignition temperature of natural gas is a serious advantage against other gaseous fuels since the compression ratio of most conventional diesel engines can be maintained. The main aspiration from the usage of dual fuel (liquid and gaseous one) combustion systems, is the reduction of particulate emissions. In the present work are given results of a theoretical investigation using a model developed for the simulation of gaseous fuel combustion processes in Dual Fuel Engines.

The diesel engine is a thermal machine with very high efficiency when compared to other similar engines. But up to now its application for automotive purposes is limited due to the existing limits in power concentration, speed and noise. Up to now most diesel engines used for automotive applications are of the Indirect Injection type due to their ability to operate at relatively high rotational speeds and at low Air Fuel Ratios when compared to direct injection diesel engines. Currently the research is mainly concentrated to DI diesel engines due to their lower specific fuel consumption. Nevertheless it is not entirely clear that IDI diesel engines will be completely replaced. But if we consider in general the diesel engine regardless of its type, it is widely recognized that one of the major problems with their application on automobiles is the emission of particulates (smoke etc.).

During the last years a great deal of effort has been made for the reduction of pollutant emissions from direct injection Diesel Engines. Towards these efforts engineers have proposed various solutions, one of which is the use of gaseous fuels as a supplement for liquid diesel fuel. These engines are referred to as dual combustion engines i.e. they use conventional diesel fuel and gaseous fuel as well. The ignition of the gaseous fuel is accomplished through the liquid fuel, which is auto-ignited in the same way as in common diesel engines. One of the fuels used is natural gas, which has a relatively high auto-ignition temperature. This is extremely important since the CR of most conventional diesel engines can be maintained. In these engines the released energy is produced partially from the combustion of natural gas and from the combustion of liquid diesel fuel.