Search Results

In order to address the CO₂ emissions issue and to diversify the energy for transportation, CNG (Compressed Natural Gas) is considered as one of the most promising alternative fuels given its high octane number. However, gaseous injection decreases volumetric efficiency, impacting directly the maximal torque through a reduction of the cylinder fill-up. To overcome this drawback, both independent natural gas and gasoline indirect injection systems with dedicated engine control were fitted on a RENAULT 2.0L turbocharged SI (Spark Ignition) engine and were adapted for simultaneous operation. The main objective of this innovative combination of gas and liquid fuel injections is to increase the volumetric efficiency without losing the high knocking resistance of methane.

Since the Euro VI/6 regulation came into force in 2013/2014, most of the Diesel applications are equipped with both selective catalytic reduction (SCR) systems and Diesel particulate filters (DPF). On the one hand, SCR requires ammonia for the reduction of nitrogen oxides (NOx) created during the combustion process. An aqueous urea solution (AUS) containing 32.5% wt. urea, such as AdBlue® is injected into the hot exhaust gas upstream of the SCR catalyst to produce ammonia for NOx reduction. On the other hand, DPF demonstrates very high particle filtration efficiency, but requires to be periodically regenerated at high temperature to burn off accumulated soot. The regeneration temperature and duration can be significantly lowered by using fuel additives (fuel-borne catalyst or FBC) or by washcoating a catalyst into the DPF (catalyzed DPF or cDPF).

Diesel Exhaust Fluid (DEF) like Adblue® is a urea/water solution injected upstream from the SCR catalyst. Urea decomposes into ammonia (NH3) which acts as reducing agent in the de-NOx reaction process. However, incomplete decomposition of urea can lead to unwanted deposits formation, thereby resulting into backpressure increase, loss of NOx reduction efficiency, and durability issues. The phenomenon is aggravated at low temperatures and can lead to restriction or stop of DEF injection below certain exhaust temperatures. This paper focuses on the influence of the additivation of DEF on deposits formation in a passenger car close-coupled SCR on filter Diesel exhaust line installed in a laboratory flow bench test. The behavior of two different additivated DEF was compared to Adblue® in terms of deposits formation on the mixer and SCRF canning at different temperatures comprised between 240°C and 165°C, and different air flows.

In order to be ever more fuel efficient the use of Direct Injection (DI) is becoming standard in spark ignition engines. When associated with efficient turbochargers it has generated a significant increase in the overall performance of these engines. These hardware developments lead to increased stresses placed upon the fuel and the fuel injection system: for example injection pressures increased up to 400 bar, increased fuel and nozzle temperatures and contact with the flame in the combustion chamber. DISI injectors are thus subjected to undesirable deposit formation which can have detrimental consequences on engine operation such as reduced power, EOBD (Engine On Board Diagnostics) issues, impaired driveability and increased particulate emissions. In order to evaluate the sensitivity of DI spark ignition engines to fuel-related injector deposit formation, a new engine test procedure has been developed.

With the emergence of stringent emissions standards and needs for fuel diversification, many countries are considering a massive use of natural gas for transportation. In this context, dual fuel diesel-CNG combustion is considered as a promising solution for highly efficient internal combustion engines. This concept offers the possibility to combine a diesel pilot injection as a high energy combustion initiation event, with an indirect injection of methane as main energy source. Low CO2 emissions can be reached thanks to the use of a conventional compression ignition engine with high compression ratio, and thanks to methane's high knocking resistance and low carbon content. Another benefit of dual fuel operation with high diesel substitution rates is the drastic reduction of PM emissions since methane is a very stable molecule containing no soot precursor.

The lifetime of the new technologies of after-treatment devices is influenced by the composition of engine oil, making it necessary to study the compatibility of lubricants with these devices. These compatibility tests usually evaluate parameters such as the long-term performance of after-treatment systems, the quantity and nature of accumulated residues due to the lubricant used, back-pressure increase, etc. This paper presents a novel, non-destructive radionuclide technique based on labeling the different elements in the engine oil (e.g. zinc and calcium), that provides additional information to after-treatment system compatibility tests: on-line measurement in the after-treatment device of the accumulation of elements from oil additives, and visualization of their distribution inside the device (inlet/outlet). Most of the work presented here focuses on the accumulation of zinc and calcium from the lubricant in a Diesel Particulate Filter (DPF).