Search Results

North America and Europe are implementing alternate fuels meet the goals of reducing carbon dioxide emissions and creating a sustainable environment. India too has promised to cut down emissions and become CO2 net neutral by 2070. One alternate fuel which has gained importance recently is hydrogen. With the announcement of National Hydrogen Mission by the Government of India in 2023, there has been an increased attention on the hydrogen fuel-based mobility. Technologies like H2-Fuel cell and a hydrogen fueled internal combustion engine (H2-ICE) are finding wider acceptance depending on the application and both offer an opportunity to meet targets of reduced carbon footprint in India and reduce reliance on fuel imports. A key advantage of H2-ICE is that its implementation requires little mod+ification to the conventional ICE. However, the internal combustion engine, even fueled with H2, still emits NOx and therefore must meet current and future regulations.

The legislative decision to accelerate the implementation of regulations requiring advanced emissions control in India have accelerated the need to advanced emissions control systems. Particulate filters and NOx abatement technology will be needed to meet the new BSVI standards. Integration of these emission control technologies into engine design poses new challenges to the Indian Heavy Duty Diesel Truck Industry. Each new market that implements advanced emission regulations faces challenges that are unique to the local regulation, the local vehicle design, and the local operating conditions. This paper will review the technology options available for BSVI, their strengths and weaknesses, and potential system designs. Additionally this paper will review how critical design factors such as filter regeneration conditions, duty cycle temperatures, and urea injection can affect the system design and catalyst selection.

A heavy duty US 2010/Euro VI type emission control system typically consists of diesel oxidation catalyst (DOC), catalyzed soot filter (CSF), urea based selective catalytic NOx reduction (SCR) and NH3 slip control catalyst (AMOX - excluded for this study). The advent of the US 2014 Green House Gas (GHG) rules has established a limit for tailpipe N2O emissions for on-road heavy duty Diesel engines, thus creating new challenges for catalyst design and system/engine calibration. In this paper, we discuss the effects of both catalyst system design and engine calibration on the formation of N2O across SCR catalysts. This study consisted of system testing on engine, modeling and component reactor testing. These three tools were used to evaluate how NO2 to NOx ratio and ammonia to NOx ratio (ANR) affect N2O formation. The study showed that all of the reviewed factors affect tailpipe N2O emissions.

The challenges of flex-fuel vehicle (FFV) emissions measurements have recently come to the forefront for the emissions testing community. The proliferation of ethanol blended gasoline in fractions as high as 85% has placed a new challenge in the path of accurate measures of NMHC and NMOG emissions. Test methods need modification to cope with excess amounts of water in the exhaust, assure transfer and capture of oxygenated compounds to integrated measurement systems (impinger and cartridge measurements) and provide modal emission rates of oxygenated species. Current test methods fall short of addressing these challenges. This presentation will discuss the challenges to FFV testing, modifications made to Ford Motor Company’s Vehicle Emissions Research Laboratory test cells, and demonstrate the improvements in recovery of oxygenated species from the vehicle exhaust system for both regulatory measurements and development measurements.

High gas prices combined with demand for improved fuel economy have prompted increased interest in diesel engine applications for both light-duty and heavy-duty vehicles. The development of aftertreatment systems for these vehicles requires significant investments of capital and time. A reliable and robust qualification testing procedure will allow for more rapid development with lower associated costs. Qualification testing for DPFs has its basis in methods similar to DOCs but also incorporates a PM loading method and regeneration testing of loaded samples. This paper examines the effects of accelerated loading using a PM generator and compares PM generator loaded DPFs to engine dynamometer loaded samples. DPFs were evaluated based on pressure drop and regeneration performance for samples loaded slowly and for samples loaded under accelerated conditions. A regeneration reactor was designed and built to help evaluate the DPFs loaded using the PM generator and an engine dynamometer.

Atmospheric modelers and development engineers need accurate measures of NO2 emissions from motor vehicles. Due to the oxidative reaction of oxygen with NO, these measurements (typically taken from a bag sample) can be inaccurate if care is not taken to minimize the sample residence time in the bags. This reaction occurs slowly at low NO concentrations, however, at higher NO concentrations the reaction can rapidly speed up (for example, 50 ppm NO will experience a 10% concentration reduction in 6.5 minutes). This report explores the factors contributing to this artifact for emissions test cells. Estimates of the error in NO2 emission rate measurements for several scenarios are presented. Additionally, kinetic expressions of the reaction rate are shown to be fairly accurate for our test conditions, but should not be used in general without verification of the non-existence of competing, hindering or accelerating species within the sample bag.

The use of Selective Catalytic Reduction (SCR) for NOx emissions control has resulted in a new challenge for the emissions measurement community. Most SCR systems require injection of urea or ammonia into the exhaust stream. Residual ammonia present in vehicle exhaust can have deleterious effects on NOx analyzers using chemiluminescent detectors (CLD). Ammonia can poison converter catalysts in CLD NOx analyzers and may react with NO2 across the converter. Both of these issues lead to erroneous NOx measurements, as well as increased maintenance costs and downtime. This paper will describe the development and use of a low-cost, simple ammonia scrubber that can easily be integrated into sampling systems and requires little change in test cell maintenance procedures. Validation results show the scrubber to have capacity sufficient to last for a full day of testing of typical vehicles.

Diesel vehicle applications are being tasked with increasingly stringent particulate emissions regulations. These regulations will require the use of Diesel Particulate Filters (DPFs). Prior to on-vehicle studies, DPF qualification studies are performed in laboratory bench reactors. In order to provide representative performance data, these studies require the testing of samples loaded with carbonaceous soot particles. A new soot generator, utilizing a pressure controlled propane flame, has been designed and built for this purpose. Soot production rates are on the order of approximately 8 mg/min at a concentration of 180 mg/m3. This allows 8 inch long cores to be loaded in 1 hour to soot concentrations encountered in typical vehicle operation. The soot generator allows for the selection of two distinct size distributions similar to typical diesel exhaust: a 57 nm peak and a 76 nm peak.