Search Results

By 2014, all new on- and off-highway diesel engines in North America, Europe and Japan will employ diesel particulate filters (DPF) in the exhaust in order to meet particulate emission standards. If the pressure across the DPF increases due to incombustibles remaining after filter regeneration, the exhaust backpressure will increase, and this in turn reduces fuel economy and engine power, and increases emissions. Due to engine oil consumption, over 90% of the incombustibles in the DPF are derived from inorganic lubricant additives. These components are derived from calcium and magnesium detergents, zinc dithiophosphates (ZnDTP) and metal-containing oxidation inhibitors. They do not regenerate as they are non-volatile metals and salts. Consequently, the DPF has to be removed from the vehicle for cleaning. Ashless oil could eliminate the need for cleaning.

This paper reports on a field test with 23 Volvo D12C non-exhaust gas recirculation diesel engines using the Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), and urea system with Ultra-Low-Sulfur-Diesel (ULSD). This combination will be used to meet the on-highway emission standards for U.S. 2010, Japan 2010, and Europe 2013. Because of future widespread use of DPF-SCR, this study reports on our field experience with this system, and focuses on enhancing our understanding of the incombustible materials which are collected in the DPF with API CJ-4 and API CI-4 PLUS oils. The average weight of incombustibles was lower in the trucks using API CJ-4 oils at 1.0% sulfated ash, than in those using API CI-4 PLUS oils at 1.4% sulfated ash. The difference in weight between the two groups was highly significant. Further, the weight of the incombustibles per kilometer substantially decreased with each subsequent cleaning within a truck.

This paper reviews field test results in 23 Volvo D12C non-Exhaust Gas Recirculation (EGR) diesel engines using continuously regenerating Diesel Particulate Filter (DPF) with Selective Catalytic Reduction (SCR) and ultra low sulfur diesel fuel at 4-10 ppm. This 2-year field test provided an opportunity to measure on-road nitrogen oxide (NOx) emissions, and to do in-depth analysis of the incombustible material remaining in the filters. In addition, two crankcase oils were used at 1.0% and 1.4% sulfated ash to provide enhanced information on the material collected in the filters, and on oil drain capability. The study demonstrates that the U.S. Environmental Pro-tection Agency (EPA) 2007 emissions can be met. After 2 years in the field the 23 trucks using the DPF-SCR system are still providing a very high NOx conversion of 75% on fleet average. The filter material contained only 2 wt-% carbon, which demonstrates the effectiveness of the DPF-SCR system in combusting soot.

Because of the rising costs of engine tests, bench testing is a necessity in engine oil development. Which bench test to use remains a problem. Recently, we have reported on the use of electrical contact resistance (ECR) coupled with a ball-on-disk tribometer to study the formation and the durability of antiwear films from binary additive mixtures. This paper extends the ECR study to fully formulated fresh oils run in both fired gasoline engines and the ECR bench test. X-ray Photoelectron Spectroscopy (XPS) analyses of used Sequence VE engine parts from highash fully formulated lubricants are shown and the relationship of ECR film formation to fired-engine test performance is discussed.