Search Results

Decreasing fuel consumption in Internal Combustion Engines (ICE) is a key target for engine developers in order to achieve the CO2 emissions limits during a standard cycle. In this context, reduction of engine friction could help meet those targets. The use of Low Viscosity Engine Oils (LVEOs), which is currently one of the avenues to achieve such reductions, was studied in this manuscript through a validated numerical simulation model that predicts the friction of the engine’s piston-cylinder unit, journal bearings and camshaft. These frictional power losses were obtained for four different lubricant formulations which differ in their viscosity grades and design. Results showed a maximum friction variation of up to 6% depending on the engine operating condition, where the major reductions came from hydrodynamic-dominated components such as journal bearings, despite an increase in friction in boundary-dominated components such as the piston-ring assembly.

Legislations aimed at reducing CO2 emissions are driving significant changes in passenger car engine hardware and lubricants. Gasoline direct injection (GDI) engines generate combustion soot which can drive wear which is characteristically different to that observed in diesel engines. The increasing market share of GDI engines has encouraged the auto OEMs and the oil suppliers to study this challenge in more depth and seek improvements which do not compromise the innate efficiency benefits of the GDI platform. This study compares soot abrasiveness by measuring the abrasive removal of Zinc dialkyldithiophosphate (ZDDP) antiwear films and resultant wear by GDI sooted oils and traditional Diesel sooted oils in the MTM-SLIM equipment. A three-way correlation has been developed between a carbon black soot surrogate, GDI sooted oils and Diesel sooted oils.

Downsized turbocharged gasoline direct injection (TGDI) engines with high specific power and torque can enable reduced fuel consumption in passenger vehicles while maintaining or even improving on the performance of larger naturally aspirated engines. However, high specific torque levels, especially at low speeds, can lead to abnormal combustion phenomena such as knock or Low-Speed Pre-Ignition (LSPI). LSPI, in particular, can limit further downsizing due to resulting and potentially damaging mega-knock events. Herein, we characterize the impacts of lubricant and fuel composition on LSPI frequency in a TGDI engine while specifically exploring the correlation between fuel composition, particulate emissions, and LSPI events. Our research shows that: (1) oil composition has a strong impact on LSPI frequency and that LSPI frequency can be reduced through a carefully focused approach to lubricant formulation.

Legislation aimed at reducing carbon dioxide emissions is forcing significant changes in passenger car engine hardware and lubricants. Reduced viscosity lubricants can reduce friction levels and are therefore helpful to manufacturers seeking legislative compliance. MAHLE and Shell have worked together to determine the crankshaft, bearing and lubricant combination which minimizes friction with an acceptable level of durability. This paper describes the results of our joint simulation studies. MAHLE Engine Systems have developed in-house simulation packages to predict bearing lubrication performance. SABRE-M is a “routine” simulation tool based on the mobility method [1] curve fitting from the finite bearing theory to simulate the hydrodynamic lubrication in steady-state conditions. Whereas, SABRE-TEHL is a specialized simulation package used for performing Thermo-Elasto-Hydrodynamic Lubrication (TEHL) analysis of bearing systems.

It is anticipated that worldwide energy demand will approximately double by 2050, whilst at the same time, CO2 emissions need to be halved. Therefore, there is increasing pressure to improve the efficiency of all machines, with great focus on improving the fuel efficiency of passenger cars. The use of downsized, boosted, gasoline engines, can lead to exceptional fuel economy, and on a well-to-wheels basis, can give similar CO2 emissions to electric vehicles (depending, of course, on how the electricity is generated). In this paper, the development of a low weight concept car is reported. The car is equipped with a three-cylinder 0.66 litre gasoline engine, and has achieved over 100 miles per imperial gallon, in real world driving conditions.

It has been recognised for many years that specially formulated gasoline engine lubricants are able to improve vehicle fuel economy [FE] by a small but significant amount. Until recently these benefits have been evaluated using unaged oils, but increased interest in fuel economy resulting from the Kyoto Protocol and the continued use of the US Corporate Average Fuel Economy [CAFE] system have encouraged researchers to explore whether analogous effects are obtained in diesel engines and whether these benefits can be sustained as the oil is aged in normal service. In this paper a test development completed within the restructured Coordinating European Council [CEC] [ref 1] using a Ford Duratorq 2.0litre diesel is described. It was found that fresh oil fuel economy performance improved when oils with reduced high temperature high shear [HTHS] viscosities were used and that performance was insensitive to friction modification.