Search Results

A fully automated off-line cartridge filling station has been commissioned to support the new Boeing SAL production cell. The filing station uses automated fastener feed technology that is typically found on the machines themselves. Incorporating this technology off-line in place of the traditional manual handling processes extends the benefits of automation beyond the main manufacturing cell. A single operator is able to keep up with the demand of eight production fastening machines while maintaining the highest levels of accuracy and quality. Additional benefits to this application of automation include reduction of the operators exposure to risks associated with manual handling and repetitive tasks.

The newest generation of automated fastening machines require a feed system that is smaller, more flexible, and faster than any currently available. The feed system must be compact enough to fit on a robot base, yet have a capacity large enough to support unmanned production for hours. A large variety of fasteners must be supported and the entire system must be reloaded or reconfigured in minutes to match the next work piece being assembled by the machine. When requested by the part program, the correct fastener must be released directly and immediately into the feed tube to minimize cycle time. This paper describes a new “plate cartridge” feed system developed to meet these needs.

The handheld (HH) electromagnetic riveter (EMR) has proven to be an effective means of installing up to 7/16\mi diameter rivets in aircraft components. These devices are currently installing rivets on Boeing and Airbus planes all over the world. They are also very popular in China and Japan. However, there have always been difficulties with stringer access. A new version of lightweight driver with interchangeable offset tooling was created to alleviate this problem. In addition, a disposable plastic wedge has been incorporated at the base of the offset ram to prevent stringer damage during the recoil.

Electroimpact's E4000 LVER riveting machine entered service in 1998 assembling A320/A321 upper wing panels at the Airbus wing manufacturing facility in Broughton, Wales. Airbus's recent introduction of the Sharklet modification to the wings of the A320 family of aircraft necessitated a number of changes to the machine and fixture to accommodate the revised wing geometry. Electroimpact and Airbus also worked together to identify a wide range of machine improvements and updates. A short list of the changes made to the machine includes a new CNC, new motors, scales, spindles, and new technologies such as laser tracers and normality sensors. The end result is a faster, more accurate machine with state-of-the-art controls ready to support Airbus's A320/321 wing panel assembly for the next 15 years.

Electroimpact has developed a new Fastener Feed System which provides an automated solution for fasteners previously hand fed via drop tubes. The hardware is simple, compact, and is supplied a fraction of the cost of hoppers or cartridges. It can be used as a primary feed system or it can be used as an auxiliary feed system when combined with feed systems designed for high quantities of fasteners. We have installed this system on the A380 Stage 0 LVER lower panel wing machines and feed 5 diameters, 10 grips each, for a total of 50 different fastener types. This system moves 547 total fasteners per ship set from manual feed to automatic feed, saving considerable build time.

An automated machine has been designed with true offset fastening to join shear-tie/frame assemblies to the fuselage of the Boeing 787 Dreamliner. The machine can access fasteners located close to structural components that are very deep. This is accomplished by offsetting the fastening axis from the axis of the head for true offset fastening. The head can be positioned next to the structural component and the offset fastening tooling ‘reaches’ out to the fastener location (Figure 1). By using a true offset, the fastening machine can access fasteners that would be otherwise inaccessible by traditional automated equipment. The machine can also be lighter and more accurate when compared to fastening machines with traditional tooling.

A new method of installing LGP collars onto titanium lock bolts has been brought into production in the Airbus wing manufacturing facility in Broughton, Wales. The feed system involves transporting the collar down a rectangular cross-sectioned hose, through a rectangular pathway in the machine clamp anvil to the swage die without the use of fingers or grippers. This method allows the reliable feeding the collars without needing to adjust the position of feed fingers or grippers relative to the tool centerline. Also, more than one fastener diameter can be fed through one anvil geometry, requiring only a die change to switch between certain fastener diameters. In our application, offset and straight stringer geometries are accommodated by the same anvil.

This paper details the Electroimpact Cartridge Feed Auto Select (CFAS) System, the Electroimpact Cartridge Filling Station (CFS) and the implementation of these systems on today&’s factory floors. Problems inherent in handling tens of thousands of fasteners per workpiece have traditionally been an Achilles Heel to many aerospace-manufacturing cells. The CFAS system moves the job of sorting through bulk fasteners to the stand alone offline CFS. With the bulk feeding process offline, problems such as contaminated fastener lots get taken care of before they ever get to a fastening machine. Modular briefcase sized coiled tube magazines store and distribute fasteners to automated riveting and bolting equipment via the CFAS rack. Cartridges captively hold 500 to 3,000 fasteners from 1/8” to 3/8” diameters and are length independent which allow a small number of cartridges to work with a large array of overall fasteners.