Search Results

A heavy duty US 2010/Euro VI type emission control system typically consists of diesel oxidation catalyst (DOC), catalyzed soot filter (CSF), urea based selective catalytic NOx reduction (SCR) and NH3 slip control catalyst (AMOX - excluded for this study). The advent of the US 2014 Green House Gas (GHG) rules has established a limit for tailpipe N2O emissions for on-road heavy duty Diesel engines, thus creating new challenges for catalyst design and system/engine calibration. In this paper, we discuss the effects of both catalyst system design and engine calibration on the formation of N2O across SCR catalysts. This study consisted of system testing on engine, modeling and component reactor testing. These three tools were used to evaluate how NO2 to NOx ratio and ammonia to NOx ratio (ANR) affect N2O formation. The study showed that all of the reviewed factors affect tailpipe N2O emissions.

It is estimated that operating continuously on a B20 fuel containing the current allowable ASTM specification limits for metal impurities in biodiesel could result in a doubling of ash exposure relative to lube-oil-derived ash. The purpose of this study was to determine if a fuel containing metals at the ASTM limits could cause adverse impacts on the performance and durability of diesel emission control systems. An accelerated durability test method was developed to determine the potential impact of these biodiesel impurities. The test program included engine testing with multiple DPF substrate types as well as DOC and SCR catalysts. The results showed no significant degradation in the thermo-mechanical properties of cordierite, aluminum titanate, or silicon carbide DPFs after exposure to 150,000 mile equivalent biodiesel ash and thermal aging. However, exposure of a cordierite DPF to 435,000 mile equivalent aging resulted in a 69% decrease in the thermal shock resistance parameter.

This paper presents the results of an on-road evaluation of in-cylinder ceramic thermal barrier coating GPX″-4M and turbocharger clearance control coating. Engelhard Corporation carried out the testing as a part of a pre-production product development and evaluation process. Contained in the paper are the results of a three-year long experiment conducted on an Engelhard's truck. Discussed in the paper are in-service performance and durability of Engelhard's coating. The experimental fuel usage data underwent substantial statistical treatment and analysis. In combination with the unique test conditions this allowed credible conclusions regarding the truck fuel economy. It was clearly demonstrated that the truck equipped with in-cylinder GPX coated components used 1.4% less fuel than a standard truck for the same amount of work performed over a 16-month period. This fuel saving is associated with the engine rebuild.