Search Results

Aluminum based brake rotors have been a priority research topic in the DOE 1999 Aluminum Industry Roadmap for the Automobile Market. After fourteen years, no satisfactory technology has been developed to solve the problem of aluminum's low working temperatures except the steel clad aluminum (SCA) brake technology. This technology research started at Michigan Technological University (MTU) in 2001 and has matured recently for commercial productions. The SCA brake rotor has a solid body and replaces the traditional convective cooling of a vented rotor with conductive cooling to a connected aluminum wheel. Much lower temperatures result with the aluminum wheel acting as a great heat sink/radiator. The steel cladding further increases the capability of the SCA rotor to withstand higher surface temperatures. During the road tests of SCA rotors on three cars, significant gas mileage improvement was found; primarily attributed to the unique capability of the SCA rotor on pad drag reduction.

A Diesel engine-powered transit bus was fitted with a powertrain thermal management system comprised of electrified components, including fans, coolant pump, and electronic thermostat. A high output belt-driven 24 volt DC alternator was installed to provide power for this system in addition to the normal bus electrical power loads. Except for the alternator, all components were mounted on a slide-mounted tray to facilitate service and maintenance. In practice, this “mini-hybrid” vehicle has demonstrated a fuel economy improvement of 10.5% in fleet operation during a four month period and is expected to achieve 5-7% better fuel economy annually, compared to a conventional bus. Additional benefits include lower maintenance costs, improved safety, and enhanced serviceability.

A Stewart & Stevenson M1084A1 FMTV 5-ton cargo truck was used as the subject of a study to evaluate advanced powertrain thermal management components and subsystems. Funded by the U.S. Army TACOM and the National Automotive Center (NAC) under a Small Business Innovative Research grant (SBIR Phase II), the project focused on improving thermal management of the vehicle while reducing the peak fuel consumption by >10% in a vehicle having limited ram air cooling. The FMTV was used as a surrogate test bed to investigate thermal management technologies that could be applied to vehicles with confined package space, such as light armored vehicles. The vehicle was equipped with a thermal management system featuring distributed system architecture, electric coolant pumps and fans, electronic control valve, multiple air-cooled heat exchangers, and an electronic control system with PID feedback. The entire thermal management system was mounted in a metal enclosure behind the truck cab.