Search Results

Event Data Recorders (EDRs) record valuable data in estimating the occupant injury severity after a crash. Advanced Automatic Collision Notification (AACN) with the use of EDR data will determine the potential extent of injuries to those involved in motor vehicle accidents. In order to obtain basic information in injury estimation using EDR data, frontal collisions for 29 vehicles equipped with EDRs were analyzed as a pilot study by retrieving the EDR data from the accident vehicles and collecting the occupant injury data from the database of an insurance company. As a result, the severity of occupant injury was closely related to the Delta V recorded on an EDR. However, there were several cases in which the predicted injury level was overestimated or underestimated by the Delta V. Therefore, caution is required when predicting the level of injury in frontal collisions based upon the Delta V alone.

Numerous studies of pelvic tolerance to lateral impact aimed at protecting car occupants have been conducted on Post Mortem Human Subjects (PMHSs) in a sitting posture. However, it remains unclear whether or not the results of these studies are relevant when evaluating the injury risk to walking pedestrians impacted by a car. Therefore, the first objective of the present study is to determine the injury tolerance and to describe the injury mechanisms of the human pelvis in lateral impacts simulating car-pedestrian accidents. The second objective is to obtain data for validation of mathematical models of the pelvis. In-vitro experiments were conducted on twelve PMHSs in simulated standing position. The trochanter of each PMHS was hit by a ram at speed of 32 km/h, and the pelvic motion was constrained by a bolt. This type of pelvic constraint is difficult to simulate in mathematical models.

The main objective of this study is to determine the damage tolerance and describe the damage mechanisms of the extended human knee when it is exposed to lateral impact loads in car-pedestrian accidents, particularly those that occur at a low velocity (20 km/h), and compare the results with those obtained at a high velocity (40 km/h). In-vitro experiments with human subjects were conducted where only the purest possible shearing deformation or the purest possible bending deformation affected the knee region at the time. Five experiments were performed in the shearing setup and another five in bending setup. The peak values of the shearing force and the bending moment related to the damage of knee ligaments and bone fractures were calculated at the knee joint level. Damages were assessed by dissecting the lower extremity. When the knee joint was exposed to the “purest possible shearing deformation”, the common initial damagemechanism was ligament damage related to ACL (60% of cases).

The objective of this research is to clarify the significant factors causing AIS 2+ femur or pelvis pedestrian injury, and to understand whether the current EEVC upper legform test reflects real world pedestrian accidents. An in-depth case study was conducted using the selected 82 pedestrian accident cases from 1987 to 1997 in the data base of Japan Automobile Research Institute (JARI) and Institute for Traffic Accident Research and Data Analysis (ITARDA). The results indicate the significant factors were the bonnet leading edge height, the vehicle registration year and the pedestrian age. The bumper lead was not a significant factor. However, the test condition of the EEVC upper legform test depends on the bumper lead and the bonnet leading edge height. The current test condition of the EEVC upper legform test should be reconsidered excluding the bumper lead.

Honda has been studying ways of improving vehicle design to reduce the severity of pedestrian injury. Full-scale test using a pedestrian dummy is an important way to assess the aggressiveness of a vehicle to pedestrians. However, from test results it is concluded that current pedestrian dummies have stiffer characteristics than Post Mortem Human Subjects (PMHS). Also, the dummy kinematics during a collision is different from that of a human body. Because of the limitations of current dummies, it was decided to develop a new pedestrian dummy. At the first stage of the project, a computer simulation model that represented the PMHS tests was developed. Joint characteristics obtained from the simulation model were used in building a new pedestrian dummy which has been named Polar I. The advanced frontal crash test dummy, known as Thor, was selected as the base dummy. Modifications were made for the thorax, spine, knee etc.