Search Results

Studies of rollover accidents have reported crash attributes such as the number of rolls, rollout distance, initial over-the-ground speed, average roll rate, average over-the-ground deceleration, magnitude of roof deformation, cumulative damage, time and post-crash headroom. While these more general attributes are related to the repeated vehicle-to-ground impacts during a rollover, it has been previously shown [1] that a specific ground impact during a rollover and its consequences can be studied in more detail by using its acceleration time history (crash pulse or impulse) and energy loss. These two quantities are particularly meaningful to use when studying impact mechanics, however, they are limited to circumstances where the data exists, which means real-world on-road crashes cannot be used directly. Acceleration and energy data have been collected and previously published for three Subaru Forester dolly rollover tests, and have been studied in more detail in this writing.

In connecting an exhaust pipe system to the body of a vehicle, a compromise between a soft attachment for good noise, vibration and harshness (NVH) behavior and a rigid attachment for optimum exhaust system positioning and hanger life is necessary. Classical exhaust system hangers, made entirely of rubber, cannot meet these conflicting requirements. Technology using reinforcement cording and woven fabric scrim has been used in automotive tires for many years, and scrim-reinforced rubber has been used in coolant hoses, steering couplings (“rag joints”), simple exhaust pipe isolators/hangers and other components. The presented research has culminated in a new technology in exhaust system hanger solutions comprised of a composite elastomeric rubber material reinforced with laid-in directional polyester cording.

When two vehicles contact in a side swipe collision, if one of the vehicles has lug nuts that protrude outboard of the wheel, gouge marks may be left in the other vehicle's exterior. Hereafter the marked vehicle will be referred to as the car and the vehicle with the lug nuts will be called the truck. If the car is stationary, the marks will be in the form of a curtate trochoid and will reveal no information about the speed of the truck. If the car is not stationary, analysis of the shape of the traces left on the side of the car by the lug nuts of the rotating truck wheel can determine the velocity ratio of the car to that of the truck. If the speed of either vehicle is known or can be determined using other information or accident reconstruction techniques, lug nut mark analysis will enable determination of the other vehicle's speed.

The debate surrounding roof deformation and occupant injury potential has existed in the automotive community for over 30 years. In analysis of real-world rollovers, assessment of roof deformation and occupant compartment space starts with the post-accident roof position. Dynamic movement of the roof structure during a rollover sequence is generally acknowledged but quantification of the dynamic roof displacement has been limited. Previous assessment of dynamic roof deformation has been generally limited to review of the video footage from staged rollover events. Rollover testing for the evaluation of injury potential has typically been studied utilizing instrumented test dummies, on-board and off-board cameras, and measurements of residual crush. This study introduces an analysis of previously undocumented real-time data to be considered in the evaluation of the roof structure's dynamic behavior during a rollover event.

The subject of whether roof deformation in and of itself causes occupant injury in rollover accidents has been emotionally, scientifically and legally contested for decades. Since the publication of the earliest scientific research on the issues of automobile roof strength and non-ejected passenger protection in rollover crashes, the two views have been generally diametrically opposed to one another, and the debate continues. In order to gain perspective on the subject, the question must be answered as to how effective past and current automotive vehicle roof structures, designed to meet current government and industry standards, have proven to be in protecting vehicle occupants during real-world accidents involving the rollover of the vehicle they occupy.