Search Results

In order to meet the U.S. EPA's 2007 on-highway emission standards for particulate and NOx, all diesel engines will require diesel particulate fi lters (DPFs) and cooled exhaust gas recirculation (EGR) and will utilize ultra-low sulfur fuel. As this will be the first time that all on-highway diesel engines will employ DPFs combined with ultra-low-sulfur fuel, the Engine Manufacturers Association (EMA) requested that a new oil category be developed to provide compatibility with DPFs in the exhaust system, as well as engine durability for both new and legacy engines. This paper reviews the development of this new oil category called API CJ-4, which will be introduced in October 2006. This diesel engine oil category is the first in the U.S. which limits the oil's sulfated ash, phosphorus, and sulfur in order to insure adequate service life of the DPF. The API CJ-4 oil category includes 9 fi red engine tests and 6 bench tests.

This oil category was driven by two new cooled exhaust gas recirculation (EGR) engine tests operating with 15% EGR, with used oil soot levels at the end of the test ranging from 6 to 9%. These tests are the Mack T-10 and Cummins M11 EGR, which address ring, cylinder liner, bearing, and valve train wear; filter plugging, and sludge. In addition to these two new EGR tests, there is a Caterpillar single-cylinder test without EGR which measures piston deposits and oil consumption control using an articulated piston. This test is called the Caterpillar 1R and is included in the existing Global DHD-1 specification. In total, the API CI-4 category includes eight fired-engine tests and seven bench tests covering all the engine oil parameters. The new bench tests include a seal compatibility test for fresh oils and a low temperature pumpability test for used oils containing 5% soot. This paper provides a review of the all the tests, matrix results, and limits for this new oil category.

The increasingly severe emission legislation for heavy duty diesel engines forces engine builders to modify their engine designs drastically. Together with a desire for longer drain intervals, this results in changes in engine oil specifications. Recently, a new ACEA specification for heavy duty diesel engine oils - E5 - has been added to the existing E1-E4 categories, and E1 has been withdrawn. The previous ACEA specifications - E1 through E4 - are sequential in the sense that each next category means an increase in performance. The new ACEA E5 specification, although it resembles an improved E3 product, breaks with this tradition in that it does not fall between the E3 and E4 specifications, but moves in a new direction regarding the formulation requirements. This is due to the inclusion of various API CH-4 tests that put an emphasis on the engine oils capability to handle soot.